Question about 2001 kawasaki ZX-6R Ninja
Breather spitting oil @
Posted by Anonymous on
Hi, Anonymous and the usual suspects are:
1. Oil tank/system overfilled.
2. Faulty breather valve.
3. Engine breather hose bent, pinched, kinked etc.
4. Air filter has too much "pre-oil".
5. Crankshaft seal failure allowing transmission fluid to migrate.
6. Blow by drain tube cracked/split or filled to capacity.
For more information about your question and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Oil Leak is this the airbox KawiForums Kawasaki Motorcycle Forums
Oil in carb and air box easy fix ZX Forums
Kawasaki Ninja ZX 6R Service Manual
OEM Parts for Kawasaki
2001 Kawasaki Ninja ZX 6R Owner Manual
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e
Posted on May 08, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: oil leaks from breather box
From your brief description It sounds like you are experiencing Crank Case pressure build up.
I presume your ZZR is of High mileage or possibly previous owners havn't serviced it regularly.
The problem being the compression Piston Rings wear and allow Blow Back gasses into the crank case there by building up pressure, this in turn sends an oil film up the breather tube to your air box resulting in your problem.
You could try an oil & filter change (Synthetic) Top jolly with maybe an additive plus similar for the fuel i.e. Red-Ex or similar, it may help but I doubt a cure.
If you want you could extend the breather pipe away from the box into a drip can or similar, be sure to filter it as you don't want to get contamination down in the cases.
Hope this sorts it for you?
Please press the Blue Button for appraisal of my FREE! Effort.
Thank You! & Good Luck.
Paul 'W' U.K.
Posted on Mar 05, 2009
mine does the same thing ive been told its normal just keep an eye on oil level but make sure engine is warm before checking it other wise it wont read properly on dip stick
Posted on Apr 19, 2009
Just a possibility, i found this worked on some cars with similar problem (at least reduced the amount of oil going up the pipe)
Add a (bit at a time) bottle of STP oil treatment, the thick gooey stuff, it should increase the surface tension of the oil, keeping it in one piece, not splitting up and splattering around --> thus being less readily exhaled up the blow-off pipe.
just a thought. this will also increase the compression a little since it thickens the oil, will take up a little wear too coz it likes to cling on to bearings.
Posted on Apr 30, 2009
SOURCE: oil leak out of a breather hose
a small amount of oil from the crankcase vent hose under hard acceleration is most likely normal.American bikes don't leak oil,they mark their spot!
Posted on Sep 29, 2009
Tips for a great answer:
May 02, 2014 | kawasaki ZX-6R Ninja Motorcycles
Apr 22, 2014 | 1996 kawasaki ZX-6R Ninja
Jan 11, 2014 | 1995 kawasaki ZX-6R Ninja
Oct 24, 2013 | 2001 kawasaki ZX-6R Ninja
Feb 13, 2013 | 2001 kawasaki ZX-6R Ninja
Jul 07, 2012 | 1999 kawasaki ZX-6R Ninja
May 21, 2012 | 1999 kawasaki ZX-6R Ninja
May 06, 2012 | 2001 kawasaki ZX-6R Ninja
Jul 13, 2011 | 2001 kawasaki ZX-6R Ninja
May 21, 2010 | 2001 kawasaki ZX-6R Ninja
21 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: