2003 Yamaha YZ 125 Logo
Posted on Jun 04, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

2003 yz 125 clutch

Ok my 2003 yamaha yz 125 is riding fine but when im riding and go to stop it wont shut off n less it is totally stoped so i cant stop it when im moving at all it just keeps idolling but its trying and when i do stop if i use the brakes which is like always it will stall. So im thinking the clutch is to tight and if that is the case how do i fix it?????

1 Answer

tombones

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Master 3,567 Answers
  • Posted on Jun 04, 2009
tombones
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Mar 11, 2009
Answers
3567
Questions
5
Helped
2102171
Points
15260

This sounds like dirt and grit in the oil is causing the clutch to grab. Change the gearbox oil. Ride the bike for a couple of hours using the clutch often. Now drain the oil again and put in fresh oil. This will flush out the dirt and grit. Use 10w40 motor oil. Stick with the major brands; Pennzoil, Quaker State, Mobil or Shell. Do not use synthetics or oils with "special" additives.

Other possible causes are > a need to adjust the clutch lever for 1/4" free play at end of the lever > warped clutch plates or friction plates > Clutch has been worked on and assembled wrong > low oil level in the gearbox > frozen clutch hub bearing > Incorrect clutch cable being used.

Please post a comment after the double oil change. The 2x oil change is a cheap way to eliminate a possible cause and hey, it isn't gonna hurt anything. If you still have the problem I can help with a clutch rebuild.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
2answers

On my yz 125 my kick start is jammed

Were you riding it when it jammed because that could mean the that something is sized inside the motor, like the crank or the pistion
0helpful
1answer

I have a 1990 yz 125 my clutch wont grab at all

did you torque the spring up when you put them in and did you put the push rod in the middle |???
1helpful
1answer

Gear grinding in first gear withoutany visible damage 1992 yamaha yz 125

look to see if the clutch is burned out thats what happened to my ttr 125 and we change the clutch and it was fine then hope this helps
0helpful
1answer

Noise cooming from clutch or trans.? at idle and riding slow.. yz

a possible worn clutch lining or the clutch assembly is loose. the service manual will walk you through getting it tight with a torque wrench. best if you don't ride it for the mean time.

good luck
1helpful
2answers

2003 yz 125 stalling

sounds like the clutch is grabbing rip it apart and take a look
0helpful
1answer

My 01 yz 125 is running really strange

your problem sounds common. i would also try a rejet!
Not finding what you are looking for?

478 views

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

littlewheel

Level 2 Expert

122 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...