Pin plug wiring diagram - BMW Motorcycles

Here is a color diagram of the distributor plug for a 1997 Nissan Sentra GA16DE:
Pin 1: Black/White wire - Ignition pulse signal Pin 2: Green/Red wire - Ignition coil power Pin 3: Black/Yellow wire - Ground Pin 4: Blue/Yellow wire - Engine speed sensor signal Pin 5: Yellow wire - Power supply Pin 6: Green/White wire - Ignition coil signal Pin 7: Red wire - Power supply
Please note that wire colors may vary depending on the specific vehicle and wiring harness. It's always recommended to double-check with a wiring diagram or a professional mechanic before making any electrical connections.

https://www.narva.com.au/resources/trailer-plug-wiring-diagram

https://www.narva.com.au/resources/trailer-plug-wiring-diagram

make a 5 pin plug ---- trailer wire ---- 7 pin socket
converter cable
5 socket 7 pin round plug
Pin 2 to pin 1 left turn wire yellow
pin 3 to pin 3 Earth return to body of car
pin 5 to pin 4 right turn wire green
pin 6 to pin 6 brakes light red wire
pin 7 to pin 7 Tail light Brown wire

if it is a rectangular 7 pin then
5 socket 7 pin rectangular plug
Pin 2 to pin 1 left turn wire yellow
pin 3 to pin 3 Earth return to body of car
pin 5 to pin 4 right turn wire green
pin 6 to pin 6 brakes light red wire
pin 7 to pin 7 Tail light Brown wire
refer to narva wiring diagrams to check
could use a 12v dc probe to sus out what the pins do.
might be able to buy a converter cable from a car spare parts shop maybe or make it yourself

Depends on plug type and number of Pins used.
Is it 5 pin or a 7 pin round plug or a rectangle plug ?

http://www.narva.com.au/products/browse/wiring-diagrams

http://harmonyflutes.com/wire/vga-cable-wiring-diagram

http://www.darren-criss.org/vga-wiring-diagram/vga-cable-wiring-diagram-c0a4d90d05ff246d.html

most likely vga cable

click start control panel administrative tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers

if you can see your usb drive but its not working

ports (com&lpt) right click update driver if this fails to fix the problem

check the USB leads that attach to the motherboard usually ((red white green black)) make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems to a computer and its parts

or
PRODUCT NAME
FRONTX USB Type A Internal
PRODUCT CODE
CPX101-2
BAY USAGE
Half of large bay
CONNECTORS
USB type A female
1x5 header connector female
CABLE
USB cable (UL 2725)
Length - 2.5 feet (762 mm)

WIRE ASSIGNMENTS

Red: + 5V / Voltage + / VCC
White: D - / Data - / USB -
Green: D + / Data + / USB +
Black: GND / Voltage - / Ground
Black: S-GND / Over Current / Shielding
The S-GND wire is fatter and can be easily recognized. The connection of S-GND wire to the header pin is optional.

HEADER CONNECTION GUIDES

Diagram 1: On most motherboards, the USB header/pin-out consists of 9 pins arranged in 2 rows, which allows for 2 USB connections (i.e. USB1 and USB2). Normally, the pins for USB1 and USB2 are in seperate rows.
Diagram 2: Simply plug the connector onto the 5-pins row, and make sure that the pin assignments and wire assignments are matched correctly.
Diagram 3: Alternatively, you can plug the connector onto the 4-pins row, and leave the S-GND wire unconnected.
You might have to rearrange the wires to match with the pin assignments, or change the header connector if necessary, depending on the layout of the USB header.
On some motherboards, there is a NC pin in the USB header. You can connect the S-GND wire onto this pin. NC simply means "no connection" and NC pin is an "empty" pin.
2X5 PINS HEADER
Refer to the diagram below, for 2x5 pins header, simply plug the connector onto one row of the pins, and always make sure that pin assignments and wire assignments are matched correctly. You might have to rearrange the wires if necessary.

2X4 PINS HEADER
Refer to the diagram below, for 2x4 pins header, simply plug the connector onto one row of the pins. Please note that there is no S-GND pin in this header. You can leave the S-GND wire unconnected. You might have to rearrange the wires if necessary, in such that the wire assignments and pins assignments are matched correctly.


ACTIVE PINS NOT IN THE SAME ROW
On some motherboards, the 4 active pins are not located in the same row, as shown in the example below:

To connect to this type of USB header, you need to change the header connector to 2x5. Simply rearrange the wires within the 2x5 connector to match with the pin assignments. If the green wire is connected to the USB2+ pin, the white wire must be connected to the USB2- pin. The red wire can be connected to any +5V pin, and the black (GND) wire to any GND pin. If there is no S-GND pin provided, you can leave the S-GND wire unconnected.

hope it helps

I am guessing you mean the 7 pin trailer tow adapter.

the 7 pin RV plug itself



The 2005 trailer tow adapter wire diagrams

I don't have a wiring diagram but the black pin is if your sound card supports 5.1 you would plug the black pin into the back hole on the sound card. If not, use the green pin (in the green hole) and the black pin would not be used.

You are probably going to find four wires together that do not have a plug on them. There should also be a tag taped on the wires showing that it is for the trailer. You will have to put a plug or some kind of connection on those wires.

I believe you can look up the manufacturer of the trailer plug kit and find the wiring diagram there. On alot of the trailer plug kits, they have pics and diagrams in the package. The 7 pin plug (truck side) is available with the pig tail set up that plugs directly into the wiring harness for the lights. Then all you would have to worry about is the 2 wires for the electric brakes.

Try this website www.kiatechinfo.com

This will be far more usefull than me just handing you the diagram