My BMW F650GS sometimes stops when I put in gear. It starts normal but stops again when I put in gear. After 10-15 times trying it works normal.
SOURCE: Vibration when in gear, and stalling.
The problem is the torque converter solenoid. I had it happen on my 94 Cavalier a few years back and was a cheap fix at the local car mechanic. What happens is the transmission warms up and hits a certain speed where the solenoid engages, but then it sticks and won't disengage until it cools down sufficiently. When it sticks, it causes the car to shake when slowing down and will snub out the engine if you come to a stop.
SOURCE: BMW 1988 325 Dashboard orange check light stays on while driving.
The orange light is probably the pads wear indicator showing that the pads are worn out and the cutting out probably you need your car serviced and tune.
Cheers
SOURCE: Car hesitates/stalls when engine is warm and car starts to move.
Sounds like a bad motor mount, pop the hood and see if the motor shakes or moves rapidly when u put it in gear holding down the brake.
SOURCE: 02 taurus stalls when driving normally @when slowing for stop
check for vacume leaks most common problem for symptoms listed its hoses on engine look for dryrot cracked, or broken hoses or lose come off
SOURCE: my bmw does not start sometimes , when i turn the engine
Thats a solinoid problem you have on the starter motor have it checked out.
123 views
Usually answered in minutes!
×