Motorcycles Logo

Related Topics:

barbara abreu Posted on Jan 06, 2014

I think the accelerator for vento scooter is stuck and when it shuts off makes a weird noise

1 Answer

90gtvert

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Hot-Shot:

An expert who has answered 20 questions.

  • Contributor 24 Answers
  • Posted on Jan 31, 2014
90gtvert
Contributor
Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Hot-Shot:

An expert who has answered 20 questions.

Joined: Feb 25, 2011
Answers
24
Questions
0
Helped
13275
Points
34

You should know it if the accelerator (throttle) is stuck. If the throttle moves freely and the engine responds, it's not stuck. If the engine doesn't respond to input from the throttle it needs to be thoroughly checked from the throttle assembly on the handlebars to the carburetor. A corroded, kinked, or frayed cable can cause the throttle to stick. DO NOT RIDE WITH A STUCK THROTTLE! If it does hang wide open, hit the kill switch immediately and sort the issue out before trying to start the scooter again.

1 Related Answer

Anonymous

  • 1 Answer
  • Posted on Dec 19, 2012

SOURCE: I have a 2007 vento zip scooter, it starts and runs until it gets hot, then bogs down and shuts off.

ok i got a cdl box an it didnt fix it should i get a coil or a voltage regulater box

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

What kind of oil does a 2005 Vento Zip r3i Turbocam

Vento was headquartered in San Diego, California, and began producing motorcycles and scooters in 1996, with design and development teams based in China, Italy, and Australia, as well as California. While many parts were made in China, the final assembly took place in Laredo, Texas. The company initially spent a lot of money building a presence in the United States with widespread international distribution, proudly displaying their ""American-built"" status. However, they lost their footing and went out of business in 2008. The Vento Zip - officially called the Vento Zip r3i Turbocam - has a sub-model in the GT5, and both models are 50cc entry-level step-through scooters.
Powered by an air-cooled, two-stroke, single-cylinder engine, the Zip is a carbureted, SOHC valve powerplant, running on premium fuel. No one who rides a 50cc scooter should expect great acceleration, and this little scooter is no exception, with 4.9-horsepower at 6.8 lb-ft of torque, about average for its class. The belt-driven continuously variable transmission puts the Zip squarely in the start-and-go category; a young rider does not need to learn how to operate a clutch or shift.
Anti-lock brakes are also standard on the Zip, with a disc brake in front and a rear drum. A telescoping fork provides the front suspension, and the rear suspension is a single-sided steel swing arm. They don't come with adjustable shocks, but given the low speeds they are designed for, a rider shouldn't need them.
The digital instrumentation is more complete than a lot of entry-level scooters'. Remote, keyless ignition is standard, along with several other standard features, including an alarm system, a clock, a fuel gauge, a speedometer, and an odometer. The dash features a fold-out, hard plastic, locking pouch in the front. The under-seat storage is lockable and shares its already tiny compartment with the battery, so it doesn't even provide enough room to store textbooks. There are also small, locking right and left compartments. Neither is large enough to hold a helmet, so make sure you purchase a way to lock it onto the stock rear rack. Plan to either divide your goodies up between the storage, or buy a good backpack.
0helpful
1answer

Gogo ultra runs making noises

What shape are the brushes in on the motor? If the copper wire is discolored that indicates over current. The armature may have a shorted winding after an extended overheat condition. You may get lucky by just cleaning the surface of the armature where the brush contacts it.
0helpful
1answer

I have a 2007 vento zip scooter, it starts and runs until it gets hot, then bogs down and shuts off.

ok i got a cdl box an it didnt fix it should i get a coil or a voltage regulater box
0helpful
1answer

I have a bkm xeidon 150cc scooter. It will not go over about 35mph and it lurches when it does this. It acts as though it is not gettting gas but it does not stall. It sounds good at idle and...

EASY FIX!! There is a silver cover over the carb, remove two screws.Inside there is a spring that holds down a diaphram made of soft rubber,it may have a hole or be damaged in some way or not seated properly.If it has a hole or slit it can be fixed with gorilla glue till you can find a new one. good luck. Joe D
0helpful
1answer

When i accelerate, I hear a weird noise that is

Could be CV joints or wheel bearings. Need to have them checked it could be dangerous.
1helpful
1answer

Battery size (volts) gas to oil mixture

12V battery 40:1 to 50:1 two-stroke ratio, but you shouldn't need to worry about that - it has automatic two-stroke injection.
Not finding what you are looking for?

170 views

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66759 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...