SOURCE: fork oil level
Forks can get pretty complicated. If they have been worked on it is not just re-filling with oil to a certain level. That would be the case if the seals leak a bit and all you are doing is adding oil to replace what has gotten past the seals. I am giving you a site where you can download a free factory service manual. Everything on servicing the forks and the rest of the bike is in the manual. There is a 2003 manual on the site. Your 2004 forks are the same as the 2003. All other service procedures are also the same. Go to this site and you can download a free PDF service manual. The site may take up to 20 seconds to load the complete list of manuals. Please rate my answer. Thanks!
www.carlsalter.com/motorcycle-manuals.asp
SOURCE: amount of oil in forks
The forks have to be bled correctly, then oil filled to the correct level by oil level (height) measurement. You need the service manual for your model if you are not familiar with the procedure. Since you asked the "amount" instead of "level" in millimeters - I assume you need the manual.
SOURCE: i need to know the oil level per fork for a
Oil Capacity each fork 286+/-4cm cubed {10.1+/-0.14Impoz,9.67+/-0.14US oz}
please visit this site for more info --> http://www.xjbikes.com/Forums/viewtopic/t=18730/highlight=seca+fork+rebuild.html
1,313 views
Usually answered in minutes!
×