2002 Yamaha V Star 1100 Classic Logo

Related Topics:

A
Anonymous Posted on Dec 30, 2013

Starter clutch replacement 2002 v star Silverado classic 1100

5 Related Answers

Anonymous

  • 2 Answers
  • Posted on Jul 27, 2009

SOURCE: 2005 v-star 1100 wont start . starter spins but

I just replaced the starter clutch in my Yamaha. It's not $85 and 1.5 hours...It's $995 and 4 hours! Be prepared... I WISH it was under $300!!

Ad

Bob G

  • 104 Answers
  • Posted on Oct 03, 2009

SOURCE: how to remove the starter clutch on a 2003 yamaha

It is on the back side of the flywheel for the magneto/generator. You will need to remove the left engine side cover then pull the flywheel. It does take a special puller to get the fly wheel off. Once you get the flywheel off, there are 8 allen bolts that hold it to the back side of the flywheel.
http://216.37.204.203/Yamaha_OEM/YamahaMC.asp?Type=13&A=374&B=14

http://216.37.204.203/Yamaha_OEM/YamahaMC.asp?Type=13&A=374&B=37

FitzOriginal

Chris Hall

  • 842 Answers
  • Posted on Oct 09, 2009

SOURCE: Yamaha 1100 Drag Star 2001 Custom motor starter,

These parts are fairly reliable. Rather than buying new, you should be able to pick one up from a motorcycle breaker who will post it to you. I would expect to pay about £60-£100 tops in the UK (Depending on mileage). ANy Yamaha dealer will be happy to order you one new, but they are a hell of a price!

Anonymous

  • 68 Answers
  • Posted on Jan 22, 2010

SOURCE: replaced starter relay and stater in yamaha 1100 2001 v star

Charge battery to full, start in neutral, still clicks? Bad ground, or bad connection. Jump starter solenoid with screwdriver,etc. if motor turns over the relay is bad. Chaz Moto DC

superswire

  • 13 Answers
  • Posted on Mar 28, 2010

SOURCE: can you adjust clutch to stop sliping on 2000 v

Your clutch cable should have about 1/4 inch free play measred at the lever, check this by pulling the clutch lever slightly, look between the perch and lever, should have a small gap before it puts tension on the lever, if you adjust this and it still slips, it's problably shot, best bet is to ebay a good barnett clutch kit (under $200) and a cover gasket (prob 20 bucks or less), get a manual (30 or 40 bucks or 5 bucks for a pdf) and do-it-yourself, you will be way under dealer cost and have a better understanding for your machine, clutches come with instructions and repair manuals are priceless when you have a motorcycle !!!

best of luck and happy riding !!!

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
2answers

My 2002 yamaha vstar 1100 classic started and ran fine. now the starter just spins. it wont turn the engine over to start it. i already changed the battery. what could be the problem?

The one way clutch inside the motor is slipping. On the back side flywheel is a one way clutch that grabs the starter gear when the starter motor spins. It is designed to let go of the gear once the motor fires up. If the mating surface of the one way clutch and the starter gear becomes rough or chattered, it will no longer grab and turn the motor over. To repair this you will have to take off the crankcase cover and pull off the fly wheel to replace the one way clutch and the starter gear.
Not finding what you are looking for?

148 views

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

littlewheel

Level 2 Expert

122 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...