The antifreeze needs to have corrosion inhibitors for aluminum engine blocks, it can be found just about anywhere regular antifreeze is sold. it should say it is for aluminum blocks on the bottle
Standard auto antifreeze. Follow directions on the back and make sure you dilute the antifreeze with water. Undiluted doesn't provide enough protection.
SOURCE: What type of Motor oil
Use
only a JASO MA
certified motorcycle oil. Automotive oil uses different additives and
will shorten the life of your wet clutch and transmission gears. Shell
Rotella T for diesel engines , both standard and synthetic are JASO MA
rated.10w-40
oil is good for cold climate. 20w-50 for hot climate/touring. Synthetic
oil will make your cycle run cooler and shift easier. For the engine you will probably need four quarts
of oil, a spin on filter,and a drain plug washer . Pour in three quarts and check the oil level by placing your
motorcycle on the center standard looking at looking at the dip stick. Run the motor and top up as
needed. If changing the oil filter you will have to run the motor to get
an accurate oil level reading. You will use between 3.2 and 3.4 quarts.
Your final drive
uses 80/90 hypoid gear oil. Synthetic hypoid oil will reduce friction
and make your final drive run cooler.
1,461 views
Usually answered in minutes!
×