SOURCE: 2nd gear problems
Your teeth are worn on second gear. You'll have to disassemble the transmission to fix it. Sorry for the bad news. If you have a shop manual, Clymers or Haynes manual the procedure is quite detailed. Not something I would do myself unless you have a lot of experience.
SOURCE: Can select 1st gear and 2nd gear but am unable to
The gearbox does not need to be relpaced. The bike has a bent shift fork. The engine comes out then gets a complete tear down to get to the bad fork. This will probably cost $1200 or so. Call a dealer and get an estimate. Please rate my answer. Thanks.
Testimonial: "Thanks very much for your advice and help!!!!! much appreciated!"
SOURCE: gear box cant get 2nd 3rd 4th or 5th can get 1st
As suggested the fault is relative to a problem within the gear bax- transmission and it can be a case of gears, selectors , counters etc that have worn out but a complete picture can be confirmed only after a first hand view.
Take consensus and estimate if you do not have the equipments and support.
198 views
Usually answered in minutes!
×