Best would be to take the readings with a vierner caliper of the hub where the bearing fits and than take an outer reading of the bearing itself see the difference and this will tell you if the bearing is of the wrong specs or the hub is worn out.
Usually the bearing should go in a little tight to the hub.
Hope this helps.
SOURCE: how to change motor oil in 1996 yamaha xv virago 535
http://www.carlsalter.com/motorcycle-manuals.asp
free service manual there it'll tell you all you need to know
SOURCE: schematic diagram of a 1981 yamaha 750 virago carburetor
Should get a good view of it by downloding free manual at
carlsalter.com...good Luck to you friend...Tim
SOURCE: need detailed diagram for all fuel, vacuum and emission hoses
for a detailed manual, you would have to buy a yamaha shop manual for service mechanics. many ppl buy these, as dealership mechanics need this for complete repairs.
SOURCE: How do I remove the exhaust baffles on a stock
baffles are either welded in, or bolted in at back of tail pipe. if welded you will have to chiesle them of or cut the welds off with dremel tool.plz rate-bozcro
140 views
Usually answered in minutes!
×