1999 Kawasaki Ninja 250 Turn the key and I have dash lights lit up. Headlights won't turn on and bike will not start.
SOURCE: TRYING TO INSTALL A AUTO START ALARM ON MY 2000
do you hear your fuel pump come on when you try it with your key fob
SOURCE: my 250 vt 1999 turn key on headlights everything
Your starter button is designed to turn the headlight off when pushed in halfway so all the batteries electricity goes to the starter. The starter button is a two position switch. The starter button may be either dirty and need cleaning or is broken and needs to be replaced. If you push the button all the way in do you hear a click? If you hear a click by the battery , then the starter button is good. Follow the positive battery cable to the starter solenoid. With an old screw driver or a piece of wire touch the two terminal posts on the starter solenoid together. If your starter works now you have a bad starter solenoid. If you hold the starter button and lightly tap on the starter with a plastic hammer and the starter works, then you probably need to replace your starter brushes they are worn out.
SOURCE: After I test rode the
I do not think that there is any damage but I suspect loose ground wire or connections somewhere which could have happened by accident when the work was done on the bike. I suggest to trace the wiring harness from the gauge first. Ground wires are connected to the bikes frame. Check also the fuses just in case there was a short.
SOURCE: Bike won't start, won't turn over, lights
Changed the FOB battery in mine andf it was the problem, try it!!!
184 views
Usually answered in minutes!
×