Wireing Kit Need to know the wiring kit model number for my Yamaha G5. Need to change the wiring kit. The head light don't come on and the indicators are not working. this has happened before and had repaired the wiring five times before. Now the service guy say's the wiring kit needs to be replaced and I need to know the model number.

1. Hunter Fan - Accessories

   www.hunterfan.com/Accessories
   Need more control? We have many universal remotes and wall control options for yourfan and light ... Customize your lighting. Add a new light kit or change the lighting hardware on your fan. Complete light kits. Need lighting parts? Glass and ...‎Complete Light Fixtures - ‎Controls - ‎Glass/shades

remove factory radio ,if you dont have the special tool to do this you can use coat hangers but I perfer using the factory tool sold at wallmart (the cheepest) or autozone push tools into holes on both ends of radio pull radio out. disconect wireing harnes and antenna wire.To install new radio you will need a wireing adaptor and a install kit. These must be spasific to your vehicle. you can buy these online Ebay , or Amazon or off line wallmart or orillys auto parts you will have to connect your new radio wiring harness to wiring adaptor.put install kit on new radio attach antenna wire connect wireing adaptor to original radio wiring push radio gently back into dash with install kit attached. enjoy your new radio. if this was helpful please leave good feed back.

It sounds you have a short or an internal problem in radio I would by an after market radio with antenna kit and harness kit

The easist way to install it ,Is to get a wireing kit from a car audio supply store for your ford, As long as the radio harrness isn,t cut off you can get a wireing kit that plugs in to the factory harness, I installed car audio equipment for over 40 years, Untill i retired this summer, End a llways use a kit,If some one didn,t cut the harness of, If they did cut the factory harness off,I would go end get one from a auto wrecker ,End put it in all so. It makes it a hake of a lot (Easier) to install, Hope this hels you out,

go to store and buy adapter kit simple

First, you need to look for a model number for the equipment, this will greatly increase the chance of success in figuring out how to install the equipment.

rectifyer or diode type

The kits are great, they work, They eliminate the need for running extra wires for the brake and blinker, they don't mix well. Also, you need a real good ground on your trailer or you will get dim lights, or no lights at all.

YOU WILL PROBABLY BE ABLE TO GET A WIRING DIAGRAM FROM NOKIAS WEBSITE

I can;t look this up without the model number, but indications like this usually mean that the lamp needs to be changed. Look in the owner's manual for a listing of these indicators.

Dan