Open the electronics box and jump the solenoid . If the starter works you have a bad solenoid. If you hold the starter button and tap on the starter, and the starter works , you need starter brushes. If the starter has burnt coils, has a shorted armature , or is wet inside, you need a new starter.
No cranking ! After you push your button , just clicks, try to bypass your start solenoid at your ignition box. I would pull out spark plugs first. Just take a screw driver and cross the main battery post to the starter post at the box. If it turns over than your start solenoid is bad.
395 views
Usually answered in minutes!
×