Motorcycles Logo

Related Topics:

A
Anonymous Posted on Sep 09, 2013

I have idling problem with my two wheeler (bajaj wind 125). The idling is not working for first two kilometer. The mechanic recommended to change the bore-piston set and two valve. The maintenance is best for its life and already ran 100000 kms approximately. Please advice what the problem may be and where to correct?

5 Related Answers

Anonymous

  • 2712 Answers
  • Posted on Nov 10, 2008

SOURCE: Maintenance

Hero Honda Passion is a four stroke engine with Japanese technology. Usually this bike gives good mileage and apart from this the engine is very smooth with small valves which take part in combustion. Service after every 4000Kms is compulsory and at the time of servicing the engine it has to be tuned.Apart from such services personally you have to do this services : 1) Weekly water service using shampoo. 2) Check the battery terminals every week and clean them with warm water. 3)Use shining cloth for cleaning the painiting surfaces. 4)Check the blow as per the requirement (Every week). 5)Check the break linings every two months. 6) Cover the vehicle when not is use to protect from dust,

Ad

Anonymous

  • 1 Answer
  • Posted on Sep 10, 2009

SOURCE: 1984 yz 125 power valve how do i set it

You don't have to do anything It does it on its own as long as the pieces are all there. The power valve is the thing that opens up a larger exhaust hole for the two stroke engine. It is shaped like a spool and it twists as pressure builds due to high rpm. On the 1984 it is on the left side of the bike right up front behind the clutch cover.

Anonymous

  • 1 Answer
  • Posted on Oct 08, 2009

SOURCE: Ideling problem and Black Smoke

Please check the air hose under the gas tank

Anonymous

  • 76 Answers
  • Posted on Jan 29, 2010

SOURCE: My 2004 Suzuki drz 125 will start, but when left

have you ever had the carb cleaned if not you may have a patially clogged idle jet remove floatbowl with a small screwdriver remove the smaller of the 2 jets the large one is the main jet remove and clean when held up to a light you should be able to see through it if not it needs to be cleaned a very small piece of wire works well but make sure its not to big or you will ruin the jet they are made of brass and are softer than most metals

Anonymous

  • 1 Answer
  • Posted on Jun 25, 2010

SOURCE: whre do i can buy a genuine bajaj spare parts

i was also facing problem with availability of genuine bajaj spares for my Bajaj-Caliber motor cycle.
But i had to import it from india.
dealer name H.M AUTOMOTIVES Pte LTD www.hmcalcutta.freewebspace.com

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Kawasaki/Bajaj Wind 125 Philippines. How can we

The most obvious way will be a distinct lack of spark at the plugs or a very weak yellow spark
0helpful
1answer

Bajaj wind 125 : rpm increases when pressing clutch while lowering the gear & engine not remainig at idle tuning

For me that is normal they call that engine brake. If you ever drove a manual transmission car from high gear to low gear it will do the same thing, but if you are driving a Automatic car it will not do that because the clutch is automatic you will not hear that loud noise.
4helpful
5answers

Whre do i can buy a genuine bajaj spare parts

i was also facing problem with availability of genuine bajaj spares for my Bajaj-Caliber motor cycle.
But i had to import it from india.
dealer name H.M AUTOMOTIVES Pte LTD www.hmcalcutta.freewebspace.com
Not finding what you are looking for?

78 views

Ask a Question

Usually answered in minutes!

Top Bajaj Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you a Bajaj Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...