Question about 1996 kawasaki ZZR 1100

1 Answer

1996 Kawasaki ZZR 1100 cam timing

How do you set the timing on a Kawasaki zzr1100 my timing chain broke so need the timing on the cams and firing order which side is number 1 piston @

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • kawasaki Master
  • 57,616 Answers

Hi, Jacques for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://ivangrigoryev.com/en/chain-adjustment-kawasaki-zzr-1100
Valve clearance adjustment using shims on motorcycle Part 1
http://motorhead.jactup.com/ZX-11/tech/ZX11_Service_93_01-converted.pdf
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Posted on Jul 08, 2018

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 3567 Answers

SOURCE: need to remove the cam chain on my kawasaki zx6r

Cam chain replacement is a bit complex for a beginner. I don't recommend it. However, I would suggest the best way is to have a service manual at hand. Go to this site and you can download a free PDF service manual.www.carlsalter.com/motorcycle-manuals.asp

The 2005 manual (4th from the bottom), is 11MB. You can go with the '05 manual as the service proceedure is the same as the 1998. The 2002 manual is 80 MB (scanned differently).

70adb57.gif

Go to the site below where you can see a parts diagram for your specific bike. You will select the actual brand, year, model, etc., once you go to the site. Part numbers and prices are also shown. You can order parts from this site. In the event no price is shown on a particular part and/or the notation "Not Available" is in the description, the part is not in stock. www.babbittsonline.com/pages/parts/viewbybrandand/parts.aspx

Can I get a “very helpful” rating on this answer?

Posted on Aug 14, 2009

  • 3567 Answers

SOURCE: How do you set the timing on a 1995 kawasaki zx6?

Timing chain replacement is a bit complex for a beginner. I don't recommend it. However, I would suggest the best way is to have a service manual at hand. Go to this site and you can download a free PDF service manual.www.carlsalter.com/motorcycle-manuals.asp
The list of manuals may take 10 to 15 seconds to come up. The 2005 manual (4th from the bottom), is 11MB.

70adb57.gif

Also, go to the site below where you can see a parts diagram for your specific bike. You will select the actual brand, year, model, etc., once you go to the site. Part numbers and prices are also shown. You can order parts from this site. In the event no price is shown on a particular part and/or the notation "Not Available" is in the description, the part is not in stock. www.babbittsonline.com/pages/parts/viewbybrandand/parts.aspx

Can I get a “very helpful” rating on this answer?

Posted on Aug 15, 2009

ZJLimited
  • 17970 Answers

SOURCE: Need firing order and, I need to know what side

To avoid confusion, remove and tag the spark plug wires one at a time, for replacement.

The 3.5L (VIN H) engine's unique ignition system has the ignition coils directly over each plug. No spark plug wires are used.
If a coil is replaced on any of the 3.1L, 3.4L or 3.8L engines, it may not be numbered, as is the factory coil. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes in your guide to reflect how your engine is wired.

f6067f3.jpg

Fig. 3.1L (VIN M) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System

0726c45.jpg

Fig. 3.4L (VIN X) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System

0476e1c.jpg

Fig. 3.4L (VIN E) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System

174502a.jpg

Fig. 3.5L (VIN H) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System

69d9a4f.jpg

Fig. 3.8L (VIN 1) engine Firing order: 1-6-5-4-3-2 Distributorless Ignition System

806db5e.jpg

Fig. 3.8L (VIN K) engine Firing order: 1-6-5-4-3-2 Distributorless Ignition System

The firing order for the 3.1L VIN M, 3.4L VIN E, 3.4L VIN X and 3.5L VIN H engines is 1-2-3-4-5-6. The right bank cylinders are on the cowl side (rear) of the engine compartment and are numbered 1,3,5, left bank cylinders on the front side of the vehicle, are numbered 2,4,6.
The firing order for the 3.8L VIN K and 3.8L VIN 1 engines is 1-6-5-4-3-2. Starting at the front of the engine, cylinders in the left bank are numbered 1,3,5 and cylinders in the right bank are numbered 2,4,6

Hope helped (remember rated this help) Good luck.


Posted on Oct 19, 2009

Testimonial: "I really appreciate your help. This really helped me alot."

wayneman01
  • 301 Answers

SOURCE: i NEED TO KNOW HOW TO TIMMING THE VALVES ON ktm

Turn the engine so that the piston is at top dead center (TDC), verify by aligning the "T" mark on the flywheel. With the piston at TDC, insert the camshaft with the cam lobes facing down (all valves closed).

Posted on Nov 02, 2009

  • 47 Answers

SOURCE: how to set the timing chain on a 2005 kawasaki

Timing chain marks??? Or marks on your cams?? On the cams you should have 2 marks on each side of your cam sprocket. They should be even with the top of your jug...

Posted on Dec 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 Kawasaki ZZR 1100 how to access the battery


Hi, Clifford for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Battery access on ZZR1100
Kawasaki Ninja Seat Removal battery servo access
Kawasaki zz r1100 Service Manual
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Jan 08, 2018 | 1995 kawasaki ZZR 1100

1 Answer

How do I adjust the drive chain on a zzr1100.


should be marks on each side of the axle , loosen the main nut and use a spanner to adjust the amount of tension , make sure you move both adjusters the same so the marks on each side line up
you need about 25mm of slack in the chain measured at the halfway point under the chainguard.

Mar 09, 2014 | 1996 kawasaki ZZR 1100

1 Answer

1996 Kawasaki ZZR 1100 top end rattle


Hi, Gav I would love to help you with your engine or chassis noise but I just loaned my brand new pair of listening ears to your local dealer's chief technician so he could take your bike for a test ride and give you his professional opinion and estimate about your noise and repair cost. If you are a little short on "DRACHMA" and a Dealership is not on your list of fun places to visit then perhaps the list below will help soothe your worried mind so you can make an informed decision.
1. Bearings---SCREECH---WHINE
2. Belts---CHIRP
3. Brake Rotors---BUZZ
4. Cam Chains---CLICKIT
5. Clutches---CHATTER
6. Cylinders---PING
7. Fairing Panels---WHISTLE
8. Fenders---SCRAPE
9. Fronk Forks---Plunk
10. Fuel pumps---WHIRR
11. Gears---WHINE
12. Head Gasket---HISS
13. Hydraulic Lifters---TAP
14. Instrument Clusters---BUZZING
15. Kick Starter---GRINDS
16. Pistons---SLAP
17. Power Valves---CLINK& RATTLE
18. Radiators---GURGLE
19. Rear Chains---RATTLE
20. Rear Shocks---SQUEAK
21. Relays---CLICK&BUZZ
22. Shaft Drives---WHIRR
23. Shifting Trans---CLUNK
24. Solid Lifters---TICK
25. Speedometers---bzzz
26. Starters---CLICK
27. Rods Go---KNOCK-KNOCK---who's there, it's me "*****"
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Tapping noise when cold ZZRBikes
https://www.zzr-international.co.uk/viewtopic.php?f=12&t=8789
Kawasaki Ninja ZX 11 Service Manual
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Aug 11, 2013 | 1996 kawasaki ZZR 1100

1 Answer

2003 Kawasaki ZZR 1200 cam chain adjustment


Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing and printing please click on the blue links below. Good luck and have a wonderful day.
Factory Cam Chain Tensioner Reset KawiForums Kawasaki Motorcycle Forums
Adjusting manual cam chain tensioner cct
KAWASAKI ZZR1200 Service Manual
OEM Parts for Kawasaki
2003 Kawasaki ZZR1200 Owner Manual

Mar 17, 2013 | 2003 kawasaki ZZR 1200

1 Answer

1996 Kawasaki ZZR 1100 remove the fuel tank


Hi, Stephen for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
1998 Zx9 Kawasaki Tear Down Part 1
How to Remove the Gas Tank KawiForums Kawasaki Motorcycle Forums
http://motorhead.jactup.com/ZX-11/tech/ZX11_Service_93_01-converted.pdf
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Mar 18, 2012 | 1996 kawasaki ZZR 1100

1 Answer

1999 Kawasaki ZZR 1100 cam timing diagram


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
1999 Kawasaki ZZR 1100 cam timing diagram Google Search
Cam Chain Wear and Replacement Tips
http://motorhead.jactup.com/ZX-11/tech/ZX11_Service_93_01-converted.pdf
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Mar 12, 2012 | 1999 kawasaki ZZR 1100

1 Answer

1991 Kawasaki ZZR 1100 oil cooler hose routing


Hi, Cal098 for more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
1991 Kawasaki ZZR 1100 oil cooler hose routing Google Search
WIN Your Order
Kawasaki Ninja ZX 11 Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jul 15, 2011 | 1991 kawasaki ZZR 1100

1 Answer

1994 Kawasaki ZZR 1100 only runs on 3 cylinders


Hi, Pascalcschne you need "FIVE" things in order for a cylinder to run properly:
1. FUEL: in order to validate your not getting fuel spray some starting fluid into the air cleaner and hit the starter button, if it fires up and runs for a few seconds then you know you have a fuel delivery issue. Multi carb banks should be bench "SYNC"
2. SPARK: remove the spark plug and with it connected to the spark plug cable ground the threads to something metal you should see a bluish white spark if not you have a faulty spark plug, spark plug cable, ignition coil, condenser, CKP, ECM, sensor or the wiring in between.
3. COMPRESSION: you must have at least 80-100 PSI for most bikes, multi-cylinder engines should be within 10-15% of each other if not perform a leak down test you may have a burnt or bent valve or hole in the piston or broken rings.
4. CAM TIMING: confirm your timing marks are aligned to see if the cam chain or adjuster are worn out and the chain has skipped a couple teeth.
5. IGNITION TIMING: on older bikes check to see if your points have not closed up, timing plate has not become loose and confirm with a timing light for proper retard and advance functions, on newer bikes where timing is controlled by an ECM and is nonadjustable check you CKP, TPS, MAP, O2, sensor or its counterpart for integrity.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.kawasakimotorcycle.org/forum/mechanics-corner/114050-zzr-1100-running-three-cylinders.html
http://kawasakiworld.com/zx-12r/43722-sounds-like-running-3-cylinders.html
Kawasaki Ninja ZX 11 Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jun 26, 2011 | 1994 kawasaki ZZR 1100

1 Answer

Manual for kawasaki zzr 1100 and service manual were can i download


where can i find a geunie parts catalogue for a 93 zzr1100

Feb 02, 2010 | 1996 kawasaki ZZR 1100

2 Answers

My zzr 1100 makes a noise on the cluch side of the motor until it reaches operating temp. whats the problem?


could be valve noise valves should be check at regular intervals a chance it may be a wearing cam chain

Jan 28, 2010 | 1996 kawasaki ZZR 1100

Not finding what you are looking for?
1996 kawasaki ZZR 1100 Logo

Related Topics:

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5924 Answers

Marvin
Marvin

Level 3 Expert

85160 Answers

richard libby

Level 2 Expert

209 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...