Fork and engine oil for kawasaki kle 400 from 1993

Question edited for clarity.

Hi Marie

I have spent 20 minutes checking and this information doesn't seem to be mentioned online which is odd. I did find the Owner's Manual and that doesn't mention it. There appears to be no service manuals. Contact Honda Service in your country direct. Some go by CCs, some go by distance from the top of the fork leg.

This is the oil
https://www.wemoto.com/bikes/honda/nxr_125_bros_es_ks/05/picture/fork_oil_-_synthetic-_vision_france-_1_litre

Here is the Owner's Manual

Specifications - Honda NXR125 BROS KS Owner's Manual ...

https://www.manualslib.com > ... > Owner's manual

Honda NXR125 BROS KS Manual Online: Specifications. ... weight Capacities Engine oil Fuel tank Fuel reserve Passenger capacity Maximum load capacity 2053 mm ...

Search query for capacity

https://www.google.com/search?q=Honda+-+125+NXR+125+Bros+front+fork+oil+capacity

Search query for Service Manual

https://www.google.com/search?q=Honda+nxr+125+Bros+Service+Manual

Videos on Honda 125 Fork Seal replacement which feature oil filling at the end.

https://www.google.com/search?q=Honda+-+125+NXR+125+Bros+front+fork+seals+replacement

..

Front Fork Oil cc (right leg):170
Front Fork Oil cc (left leg):170
Fork oil grade:10w
Valve Clearance Cold - Inlet:0.08
Valve Clearance Cold - Exhaust:0.08
Engine Oil Grade SAE:10w/30
Engine Oil Classification API:sg
Engine Oil quantity with filter (litres):0.9
Idle Speed (rpm):1400 - 1500
Spark Plugs Gap (mm):0.8 - 0.9
2 Stroke Tank - Litres:No
Float Height:14 mm

Front Fork Oil cc 300cc 2.5cc

Front Fork Oil cc 300cc 2.5cc

Fork oil grade SAE 5/20W

hope this helps you

Total capacity is 615-623cc (1/2 for each Fork leg.)
OEM Fork Oil is type Kayaba 01
This is a 5 weight fork oil

hi, see the list below identify the correct model, the quantity is per leg, and the whole range of the zxrs used 5 weight oil,

zxr750 (zx750H), 1990 = 445 CM cubed

zxr750,(zx750K), 1991-92 = 380cm

zxr 750 (zx750j) 1991-2 = 445cm

zxr750 (zx750K) (A) 1991-2 = 380cm

zxr 750 (zx750j) (A)(CH) 1991-2 =445cm

zxr 750R (ZX750M) 1992-95 =380cm

zxr 750R (ZX750M) (A)(D) 1992-2000 =380cm

zxr750 (zx750L) 1993-95 =400cm

zxr750 (zx750L) (A)(CH)(D) 1993-1995 =400cm

SILKOLENE PRO RSF 5WT or use
SILKOLENE FORK OIL LIGHT
500-MLS OIL EACH LEG

Hi Des, Im am Irish too, howya doin? The oil you want is SAE 10W-20. and 445ml if you are changing the oil. It can be more accurately checked with the fork removed and fully compressed and the spring removed, the oil will be 120mm from the top ot the stanchion.
The manual will give you more info on this and any other future problems so here is a link to it. Good luck to ya, and please rate me if I've helped you. Thanks
[email protected]

VN1600 manual...
http://www.scribd.com/doc/9607829/Kawasaki-VN1600-A1A2-Vulcan-03-Service-Manual-ENG-by-MosuenoPW

hi there,,if u can see a air valve on top of the forks, then u can use a bicycle or foot pump to squeeze a bit more air to the fork,, or if there is an adjuster on the fork,ie, a plastic lookin cap with 1 2 3 4 and a arrow on it u can turn that to a comfortable position,, if there is nothing u can see, then u either have not enuff fork oil in each fork leg,,or if there is enuff,, u will need to change the grade of fork oil and replace wots in it,, so id say a more harder grade of oil,, usually there isnt enuff oil in the forks to make it dive into the front wheel,, try topping the oil up,,with about,4or 5 egg cup fulls of oil in each leg,,if nothing has made any difference,, put in another 4 or 5 ,,,any probs on how u put oil in2 the legs ,please do come back in ,and il tell u how 2,, im assuming u do no,, ok ,,cheers