Question about kawasaki ZX-6R Ninja Motorcycles
I need the 1994 Kawasaki zx6e clutch cable routing diagram?? please help!! @
Hi, Aaron for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
1994 Kawasaki ZX 6R Ninja clutch cable routing Google Search
Correctly routing the clutch cable KawiForums Kawasaki Motorcycle Forums
How to install Clutch Wire Ninja 650
Kawasaki 1985 ZX600 Service And Repair Manual
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e
Posted on Mar 22, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
check this site out, i know it says yamaha in the link but you can choose your bike from the site and it will show you an exploded view of your clutch
Posted on Mar 31, 2009
To remove the old cable first shorten the mid-cable adjuster to give as much free play as possible. If you need more free play screw in the adjuster at the clutch lever as much as possible and line up the slots so you can disconnect the cable from the clutch lever. Then remove the shift lever, and possibly the left footrest if needed to remove the front sprocket cover. Remove the cotter pin and disconnect the cable from the clutch release lever. Make a note of the routing of the old cable so you can replace it. Install the new cable with a new cotter pin at the lower end first, and route it the same as the old cable. To adjust the new cable, shorten the mid-cable adjuster as much as possible. At the clutch lever, turn the adjuster in and leave about 1/4" of threads showing between the locknut and the lever body. With the front sprocket cover still off, loosen the locknut on the clutch release lever and back the screw 3 or 4 turns. Turn the clutch adjusting screw in until it becomes hard to turn and then back it off 1/2 of a turn and tighten the locknut. Now lenghten the mid-cable adjuster until there is no free play and tighten the locknuts. Check that the lower end of the cable is fully seated in it's socket. At the clutch lever, turn the adjuster in so you have 1/16" free play, and tighten the locknut. Replace the front sproket cover and the shift lever and footrest.
Posted on Dec 23, 2009
Tips for a great answer:
Apr 28, 2014 | 1994 kawasaki ZZR 600
Apr 26, 2014 | 1996 kawasaki EN 500 Vulcan Classic
Nov 24, 2013 | 1992 kawasaki GT 750
Sep 09, 2011 | 1995 kawasaki ZX-6R Ninja
Jun 04, 2011 | 1998 kawasaki ZZR 600
Mar 10, 2011 | kawasaki Zx600e1 Ninja Zx6e Motorcycle...
Mar 10, 2011 | 1995 kawasaki ZX-6R Ninja
Feb 28, 2017 | kawasaki Ninja ZX6 R Motorcycles
Feb 20, 2010 | 1995 kawasaki ZX-6R Ninja
295 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: