Question about 2008 Keeway F-act 125

2 Answers

My keeway wont start

The spark plug on my bike wont spark and i dont know why 
i have bought new: 
cdi unit  ignition coil and several new spark plugs 
and my bike still wont spark all the parts that i have replaced are correct and genuine    please help ASAP

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,567 Answers

Check the fuses. Is the kill switch on or shorting out? Disconnect it and then check for spark. Sidestand/centerstand should be up, Got a good battery?

I am unfamiliar with your Keeway and just trying to help. Don't give me a bad rating if I miss the mark on this one. Thanks.

Posted on Apr 01, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Clean the points

Posted on Aug 07, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 ATK dirt bike no spark


Hi, Ken and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and CDI box.
5. Spark plug cables in bad condition, shorting / leaking, spark plug cable connections loose, check for spark leakage in the dark.
6. Faulty ignition coil, pick up coil, trigger coil or CDI box testing needs to be checked with an ohmmeter at 70 degrees Fahrenheit
7. Faulty safety switches clutch, kickstand, neutral, off/on etc.
8. Faulty ignition switch.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
ATK Rider Forum View topic 260 is getting no spark
How to fix No Spark Problem on Motorcycles and Dirt Bikes
ATK Rider Forum View topic No Spark 2000 ATK 250LQ questions and...
How to test motorcycle CDI box ignition coil
ATK Rider Forum View topic Copies of 1988 ATK 406 Owners Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e



Nov 12, 2016 | ATK Motorcycles

1 Answer

I have 1990 suzuki gsx 600f with no spark but does crank i have tried cdi box as i have 2 of the same bikes plugs seem fine checked all the wiring i don't know what it could be


Hi, Anonymous and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and CDI box.
5. Spark plug cables in bad condition, shorting / leaking, spark plug cable connections loose, check for spark leakage in the dark.
6. Faulty ignition coil, pick up coil, trigger coil or CDI box testing needs to be checked with an ohmmeter at 70 degrees Fahrenheit
7. Faulty safety switches clutch, kickstand, neutral, off/on etc.
8. Faulty ignition switch.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Testing your motorcycles Ignition Pickups
How to test motorcycle CDI box ignition coil
How to diagnose no spark situation on motorcycle
http://tinymicros.com/mediawiki/images/e/e3/Suzuki_GSX600F_Service_Manual.pdf
OEM parts for Suzuki
http://mybikemanuals.com/suzuki/suzuki-gsx-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e




Oct 06, 2016 | 1990 Suzuki GSX 600 F (Katana)

2 Answers

Theres no spark and bike wont start


you will have to check lead to spark plug then lead to coil
if your not getting spark at plug it could be a number of things ingintion
or just a loose wire best of luck hope you solve it

Mar 15, 2014 | Pit Bike 125cc 4 Stroke Dirt Bike

1 Answer

1981 Suzuki gn400 no spark


I know it sounds silly, but have you checked your earth or ground wiring. If not earthed this type of problem can occur. Did the bike run before you replaced your coil etc? You could have a crook CDI
are you using multi meter mate for correct voltage readings?

Feb 09, 2014 | Suzuki Motorcycles

1 Answer

No spark on my 2001 yamaha r1


Hi, Anonymous and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and CDI box.
5. Spark plug cables in bad condition, shorting / leaking, spark plug cable connections loose, check for spark leakage in the dark.
6. Faulty ignition coil, pick up coil, trigger coil or CDI box testing needs to be checked with an ohmmeter at 70 degrees Fahrenheit
7. Faulty safety switches clutch, kickstand, neutral, off/on etc.
8. Faulty ignition switch.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.r1-forum.com/forums/102-00-01-r1-mechanical-help/254361-2001-r1-no-spark.html
How to diagnose no spark situation on motorcycle
2000 2001 Yamaha YZF R1 Service Manual R1 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


May 06, 2012 | 2001 Yamaha YZF-R1

1 Answer

Hi there I'm stuck I don't know how to check the


Sorry but they either work or they dont.
If yours isn't working, replace it.
But before you replce it consider checking the other components, because ign mods are exspensive.
it sounds like you've been already checking the other stuff. heres what i'd check if your bike came to my shop.
1. battery fully charged, and can take a load. (weak batteries = weak ign power)
i have a bike that won't fire at all with weak battery. Make sure battery is good.
2. check for spark at plugs, make sure plugs are good. Pull plugs and turn motor over.
rest plug next to head and turn over, do not touch the plug while turning over
or you can be shocked.look for spark.
if you have spark , then you ign mod is working.
if no spark, then check #3
3. power to coils. check the power going into coils,
if power but no spark, then coil is bad.
if no power. check #4
4. power to coils comes from a ignition system ( points/ cdi /ign. module)
there is a stator and a rotor. and a signal generator. on your motor
the signal generator wire sends a signal to the cdi, every time the rotor rotates.
the ignition system (ign.mod) sends power to coil.
so if no signal to the cdi, then signal generator is bad
if signal going into cdi but not sending the power to the coils then the cdi/ ign. mod is bad.

Hope that helps
Best Regards
Big Al

Jun 28, 2011 | 1995 Honda VT 600 C Shadow

1 Answer

2007 KXF 250 electrical problem


when the ignition parts like the coil and the transistors in the cdi unit gets warmed up they dont work as well as when there cool,,,so a problem thats not there when cold will be there when its hot,,,,if the stator has a small fault in it when cold when it gets hot it turns into a big fault! the best way to find this fault is by swoping one part at a time till you fine the faulty part,,,or put it into the bike shop and pay through the knows for the fix? have you a friend with the same type of bike you could swop the parts with??? it a big big help if you have! i would start with the coil then the cdi unit,,,there the most likley parts to play up when they get to hot they go faulty!

May 21, 2010 | 2007 kawasaki KLX 250

2 Answers

Ignition bike wont start


check the battery coil wire

Feb 28, 2010 | RTO 50cc Moped Scooter

2 Answers

1996 zx11 getting sprk to one bank only


Hi and welcome to FixYa,

The voltage on the green wire must be pulsating when cranking/starting the bike, not steady. Confirm by similarly testing the voltage on the black wire on the left ignition coil. If the green still reads a constant voltage, then the CDI is faulty; to be more specific, most likely that the switching tansistor inside the CDI that drives the right ignition coil has shorted.

Good luck and thank you for asking FixYa.

Jul 09, 2009 | 1996 kawasaki GPZ 1100

3 Answers

19-95 KLF300 ATV Kawasaki 4x4 no spark put new ignitor unit on.


You said the motor cut out and popped and backfired when it quit, this is almost always one of two things; either the low speed pulse coil or the actual CDI "black" box. You will almost never lose a main coil. One thing I would also check to make sure did not happen is shearing a flywheel mag key. When the motor backfires you can easily shear a mag key if you have a heavy flywheel, (external). However when this happens you don't usually lose spark but it will certainly cause the backfire.
One other item of importance is that the bike you are in question about does not emit a bright spark when you are checking for fire. Make sure you are using a brand new plug and ground it on the head. Try to make sure you are in a dark environment when you check the spark.

Dec 13, 2008 | kawasaki KLX 300 Motorcycles

Not finding what you are looking for?
2008 Keeway F-act 125 Logo

1,183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Keeway Experts

Marvin
Marvin

Level 3 Expert

85178 Answers

richard libby

Level 2 Expert

209 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5944 Answers

Are you a Keeway Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...