Fi light came on after I change my spark plugs on my k5 1000 what can the problem be

2006 Nissan/Datsun Altima 3.5L FI DOHC 6cyl

The Spark Plug Gap

.044 inchesCaution! Gap is not adjustable on certain plug brands

Read the first post http://www.cbr250.net/forum/cbr250-problems-issues/8114-pgm-fi-light.html

try charging the battery or replacing it, change the spark plugs and check the fuses to see if any are burned out.

What model daytona triumph ???...
http://www.youtube.com/watch?v=NOlsE1T6SmE
Triumph Daytona 600 FI injectors cleaning and spark plug change

if you have changed the distributor cap,rotor button,spark plug wires and plugs and you still dont have fire then its most likely your distributor.first check the fuses or relays if you have replaced those items.

Hello! I have a problem Suzuki DR125sm 2009. no spark? radiance FI, diagnostics showed (two, three, four outbreak FI in turn) I can not find meaning codes. Please answer I [email protected]

fuel injection is the fi light there is also a butterfly valve on the exhaust if it wont open will set that same light off its not recommended to ride with that light ....make sure all injectors are plugged in

FI stands for Fuel Injection. The fuel system sensors have detected a problem. It could be anything > a dirty air filter restricting airflow, a plugged injector, an error in fuel mapping, any number of things. Serious problems can trigger the computer to prevent starting until the problem is fixed. You will need to take the bike to a Kawasaki dealer to have them plug in a code reader. The code reader will tell you exactly what the problem is. Please rate my answer. Thanks.

check plugs for a nice blue spark, if spark is orange, the problem is a weak ignition coil, check its wire contacts, or replace

• 2008+ Dodge Avenger 2.4L 4cyl.
• Remove plastic cover on top of engine, just pull on each corner for it is friction fit.
• Once removed you will see 4 black spark plug covers with one hex type screw holding each.
• Remove Hex screw and place aside, pull upward to remove plug boot from plug.
• To remove the plug, use a 5/8 socket with a 6" extension. Once plug has been turned out all the way and you cannot get the plug up and out of the hole, just press the plug boot back on the plug and pull it back up.
• Gap and replace 4 plugs with the same or equavalent type,. Drop plug down the hole and use socket to align and tighten until just snug, then torque to manufactures specifications.