Bike does not want to start

sounds like the charging system is not charging when the battery is low the starter will not disengage properly disconnect battery and charge it while battery is out with bike in a high gear 4th 5th push bike back and forth this should unengage starter once your battery is charged and back in bike if the starter engages and dis engages properly then you will need to test your stator output with a multi meter look on you tube for video to test stator good luck

If it's a single click each time, sounding like it's coming from under the seat area, starter relay, $10 part.

Starter could be jammed have you tried to pop start it? Are you getting power to the starter? Kill switch isnt on is it? Never should have left the dealer it was running when you took it there.

What about a name and model number for the trailer? I might be able to help you if I have that information.

you can call the company at (800) 242-6110 otherwise depending on the where the straps are you can goto almost any store - home dep - lowes - target - and make straps. Cut a hole either in the back or under the seat and strap them through.

Hi and welcome to FixYa,

Initially, have you checked the 30 Amps main fuse and its holder clips? It would be integrated with the starter relay. The fuse or the fuse holder may have heat related problem(s) causing it to loose conductivity when hot.The fuse may require replacement even if it tests good and/or the fuse holder would need cleaning / crimping. To locate the starter relay (main fuse), follow the battery cable from the + terminal of the battery.

Please postback results.

Good luck and thank you for asking FixYa.

Sure, take a look here Amazon com instep quick replacement
enjoy