Bike starts fine, but when I put it in gear the engine cuts off. There is no lurch or catch from the gear it just shuts off. The clutch seems to work fine.
Hello and welcome
it seems that you may have a faulty side stand switch. the side stand needs to be in the up position before the bike can be started off in gear. but if not the side stand contains a saftety switch that shuts the bike off when put into gear. to verify this you can check for spark when the bike is being turned over in gear with the clutch held in.
there should be two wires associated with this switch. a green, and green with white. so when the stand is up these two wires are connected, and the switch can be tested as such. thank you.
722 views
Usually answered in minutes!
clutch
×