Need help
There are two seat bolts under the seat that must be removed. Obviously, if the underside of the fender is covered in mud, you'll have to clean it first. A metric socket works best to remove the bolts.
After removal of the seat bolts, lift the back of the seat, then pull straight back; a plastic flange on the front of the seat hooks under the tank, and so you have to pull it backwards to remove it.
With the seat off, removing the battery is pretty easy. A rubber strap holds the battery down; unhook and remove it. Unscrew the lead wires and unhook them (negative first), then pull the battery out.
Install a replacement battery by reversing these steps. Yamaha recommends charging a new battery before installing it.
Check this picture out, just remove bolts 9-6
8,009 views
Usually answered in minutes!
×