Re: I do not know how to change air filter on my Nevada...
én próbáltam. Nagyon nehéz, vagy valamit rosszul csináltam. Leszedtem a tankot,a szelepfedelet, ás így is keserves volt. Nem tudom hogy csinálják ezt szervizben....
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1.You have to remove the air filter *** cover.
2.Remove air filter.
3.Remove 2 screws, to remove the rest of air filter ***.
4.Remove the 2 fuel lines with a long nose plier.(Take a photo of
the position of fuel lines or mark fuel lines for reassembly)
5.Unhook the throttle cable. Now to fix the Carburettor
1.Remove the 4 screws on primer bulp side of the carburettor.
2.Open the carburettor and clean with paint brush and clean fuel.
3.Replace diaframe kit(available from your nearest dealer) and reassemble the trimmer.
change main jet in the carburettor install K&N air filter and iridium NGK or DENSO spark plugs tune up your engine change oil filter and oil. Flush your radiator check tyres pressure, Check engine compression and air leaks from inlet manifold ,Run hi octane fuel and injection cleaner mix for 250k to clean the carbon in the cylinders ,check for fuel hose loose ,carburettor leaks,distributor cup aluminium contacts to be clean, Vacuum hose on distributor unit for suction for advance timing .
On the carburettor, air being drawn into the carburettor is air that needs to be filtered. Simply remove the standard air box and fit the stage6 one. But don't forget; a stage6 filter will let more air get drawn into the engine, the more extra air need extra fuel to burn otherwise you will be running lean (to much air to fuel ratio). Running an engine lean will cause it to run hotter, if engine gets too hot it will cause the piston to become seized. So if your going to fit a free flow air filter don't forget to up-jet your carburettor.
Hello rick.... Get an aerosol can of starter fluid at your local autoparts store. Also get an assistant. Remove the air filter and start it up. Have your helper squirt some starter fluid into the air intake to keep it running for a couple minutes until the partial blockage in the carburater clears. Joe
×