Hi, James for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Harley, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at [email protected]. Good luck and have a wonderful day.
https://www.youtube.com/watch?v=mvGxMztqux8
http://www.mediafire.com/file/65o6mbkdq5ty8ke/99_to_05_Harley_Softail_Service_Manual.pdf/file
https://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
http://mybikemanuals.com/harley-davidson/
https://www.6ya.com/
SOURCE: how do you change the front and rear brake pads on
Dude, buy a service manual!! It would take pages of text to explain it on FixYa!
SOURCE: how to install brake pads on a 2004 softail
There is a lot of video's on www.youtube.com/
Search for brake pad change. Then see if you can get a good video on a bike like yours. View a few, as different people do things a little different.
SOURCE: need 2 replace clutch on my 2001 softail duece
Remove the outer primary cover on left side. Don't forget to drain the oil first. Using a large pair of snap ring pliers, remove the clutch adjuster plate from center of clutch assembly. Remove compensator sprocket nut (very tight) and the clutch hub nut (left handed threads) and remove nut from bolt on primary chain adjuster. Grab the compensator sprocket and clutch assembly and lift out of inner primary.
SOURCE: I have a 2001 softail duece, fuel injected that
If it's fuel injected, the dealer will have to set the idle speed for you unless you have another type of computer on the bike.
SOURCE: How much oil does a
To the best of my knowledge, your Duece takes three quarts of oil with a filter change. The transmission holds 20-24 ounces of oil. And, your primary takes 38-44 ounces of oil.
Your oil tank has a dipstick in it. Fill the oil tank until the level is just above the lower line with the bike on the stand. The lower line is "FULL COLD" and the upper line is "FULL HOT". Do not overfill.
The transmission is the same way, On the right side clutch release cover, there's a plug that takes a 3/8" Allen or Hex key to remove. It too has a dipstick marked the same way the oil tank dipstick is marked. Check the oil in the transmission with the bike standing straight up.
In the primary, you fill the oil level to where it just touches the lowest part of the clutch spring. The outer clutch housing is bright aluminum. Inside this is a round dark colored piece of metal. This is the clutch spring. Fill or check the oil with the bike standing straight up. Do not overfill as it will make your clutch drag and you will not be able to find neutral with the engine running.
Good Luck
Steve
207 views
Usually answered in minutes!
×