I have just bought a Keeway Superlight II, (125cc) but do NOT have the Instruction/Maintenance Manual. It is fitted with KENDA tyres (front 3.25/3.50 - 16 and rear 5.00/5.10 - 15 ). Can you tell me what the manufacturers recommended tyre pressures are? Thanks.
I also have a keeway super light 125 and the tire pressure is 33 PSI in the front and back.
SOURCE: what is the correct tyre
Look at the
sidewall of both tires. There will be a 'MAX PSI' embossed on the tire. It will
probably say Max 45 PSI. At 45psi the bike will ride like a rock. At 15psi it
will ride really squirrely. Find a psi at which you feel the bike
handles well and rides well. One rider may weigh 125 pounds and the next rider
may weigh 300 pounds. The best psi for each rider will be different due to
weight. Chances are that 30 to 35 psi will do the trick. Please take a moment to rate
my answer. Thanks.
SOURCE: keeway superlight 125 adjusments
Pull the slide out of the carb then move the clip on the jet needle down one or two notches. This will richen the low range fuel mix. You can also get a rear sprocket with about 4 more teeth. This will get you off the line and out of the corners faster BUT it will also lower your top speed.
Please rate this solution. Thanks supergunner!
SOURCE: 2 broken side panels for keeway superlight 125
Go to: http://keewaysuperlight.blogspot.com/ and you will see how to repair your Keeway Superlight panels with pictures and instructions.
5,483 views
Usually answered in minutes!
×