Question about 2001 kawasaki ZX-6R Ninja

1 Answer

2001 Kawasaki ZX-6R Ninja how to tighten the chain

How to tighten the chain on 2001 zx6r @

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • kawasaki Master
  • 58,537 Answers

Hi, Timothy for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.zxforums.com/forums/zx-6r-forum/22912-chain-adjustment.html
How to adjust 20013 16 zx6r chain
Kawasaki Ninja ZX 6R Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Posted on Mar 22, 2018

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
alex_salve
  • 78 Answers

SOURCE: how do i tighten chain on 1994 kawasaki ninja

go to service center

Posted on May 17, 2009

  • 4 Answers

SOURCE: I need the wiring diagram for the 2001 zx-6r

You'll find it here

http://www.carlsalter.com/motorcycle-manuals.asp

Posted on Sep 06, 2009

  • 1 Answer

SOURCE: how do i put my 08 kawasaki ninja zx-6r back

First, put some masking tape on newly painted parts, then carefully and slowly figure out what parts cam off last, these will go on first. Be very patient here, you spent all this time to make it look new, dont negate that by getting in a hury. If you are not sure of some parts, look at manuals or the internet to get picks of how it all fits. Or slowly test fit each part tto see if its right. This is common sence but if you took pics before, and made diagrams or each part coming off , this would be easier but its still not that difficult if you work slow and dont make a short deadline. Take time to think about how each part goes back on. You may need to get some new bolts and nuts in areas that are missing some, check regular bolt supply stores for the proper metric fasteners. Hope this helps!!!

Posted on Nov 08, 2009

  • 3 Answers

SOURCE: 2001 zx-6r ninja kawasaki

Hi you first take the callipers off then loosen the left 2 allenkeys on front of the fork now you loosen axel with a 17mm allenkey on the side now pull out axell and other side

Posted on May 06, 2010

  • 1 Answer

SOURCE: im working on a 1996 kawasaki ZX-6R Ninja

I'm not an expert but try to change your plugs or check your coil

Posted on Jan 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On my 03 Kawasaki zx6r 636 it seems like the chain is jumping the sprocket but chain is tight


If the chain is stretched, it'll skip, and wear down the teeth on the sprocket. It's best that you get a new chain before you have to replace both sprockets too. This may not be the problem, of course.

Apr 23, 2016 | kawasaki Motorcycles

1 Answer

Tightening primary chain on kawasaki vulcan


You probably want to adjust your cam drive chain. It's the only one that can be adjusted. They are all different but the adjuster is located on the back side of the cylinder but find out how to adjust your particular model before messing with it.

Apr 01, 2014 | 2001 kawasaki VN 800 Vulcan Classic

1 Answer

2001 Kawasaki ZX-6R Ninja how to set the timing


Hi, Jasminhr for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
timing on zx6r please asap KawiForums Kawasaki Motorcycle Forums
2005 Kawasaki ZX 6R Timing Chain Overview
Kawasaki Ninja ZX 6R Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Jul 13, 2011 | 2001 kawasaki ZX-6R Ninja

1 Answer

2009 Kawasaki Ninja ZX6R knocking noise


Hi, Suegodwiin I would love to help you with your engine or chassis noise but I just loaned my brand new pair of listening ears to your local dealer's chief technician so he could take your bike for a test ride and give you his professional opinion and estimate about your noise and repair cost. If you are a little short on "DRACHMA" and a Dealership is not on your list of fun places to visit then perhaps the list below will help soothe your worried mind so you can make an informed decision.
1. Bearings---SCREECH---WHINE
2. Belts---CHIRP
3. Brake Rotors---BUZZ
4. Cam Chains---CLICKIT
5. Clutches---CHATTER
6. Cylinders---PING
7. Fairing Panels---WHISTLE
8. Fenders---SCRAPE
9. Fronk Forks---Plunk
10. Fuel pumps---WHIRR
11. Gears---WHINE
12. Head Gasket---HISS
13. Hydraulic Lifters---TAP
14. Instrument Clusters---BUZZING
15. Kick Starter---GRINDS
16. Pistons---SLAP
17. Power Valves---CLINK& RATTLE
18. Radiators---GURGLE
19. Rear Chains---RATTLE
20. Rear Shocks---SQUEAK
21. Relays---CLICK&BUZZ
22. Shaft Drives---WHIRR
23. Shifting Trans---CLUNK
24. Solid Lifters---TICK
25. Speedometers---bzzz
26. Starters---CLICK
27. Rods Go---KNOCK-KNOCK---who's there, it's me "*****"
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
06 ZX6R Top end Engine Knocking Clack KawiForums Kawasaki Motorcycle Forums
Engine Noise on cold start ZX6R Forum
2009 2011 Kawasaki Ninja ZX 6R Service Manual Moto Data Project
OEM Parts for Kawasaki
2009 Kawasaki Ninja ZX 6R Owner Manual

Jun 26, 2011 | 2009 kawasaki Ninja ZX6R

1 Answer

I want to know if you can swap out the zx 6 engine for a zx9 engine on the 6 frame, for the 2001 zx6? @


Hi, B_smoovezxr the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Master Parts Swap List Ver2 0 98 ZX6R
Frames for zx6R and zx9R Interchangable ZX6R Forum
Kawasaki Ninja ZX 6R Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Nov 17, 2010 | 2001 kawasaki ZX-6R Ninja

2 Answers

Wiring diagram 2001 zx6r


Try this manual, it should cover all your needs. Are you sure you have the correct rating fuse in the box, the manual will solve the problem any way. Good luck:

http://vitek.vellum.cz/manualy/Kawasaki%20Ninja%20ZX-6R%2000-02%20Service%20manual.pdf

Jan 29, 2010 | 2001 kawasaki ZX-6R Ninja

1 Answer

Replacement of Water Pump. 2001 Chevy Cavalier 2.4 L


Stick with me on this
1.Put the car on jack stands
2.Remove the exhuast manifold, Do not rotate the flex cuopling more then 4 degrees od damage will occur.
3.Diconnect the coolant inlet pipe from the water pump outlet hose, Disconnect from the engine, disconnect it from the thermostate housing and remove it.
4.lower the car back down of the jack stands.
5.Detach the brack booster hose.
6.Remove the timing chain cover and the tensioner.
7.Remove the heater outletpiper from the water pump.
8.Remove the water pump cover bolts.
9.Remove the water pump retianer nuts.
Remove the old gasket and clean.
10.On bench. Install the waterpump and cover but lreave the bolts finger tight.
11.Install back in car, leave water pump bolts looseto allow for positioning.
12.Install water pump cover to engine, tighten by hand.
13.Lubricate oringand install metal outlet pipe back into pump, hand tighten.
14a.Tighten the water pump to timing chain nuts
14b.Tighten the water pump cover to water pump housing bolts.
14c.Tighten water pump cover to engine block bolts.
14d.Tighten the radiator outlet pipe to water pump.
15.Install timing chain tensioner.
16.Install exhuast manifold.
17.Install exhuast pipe.
18. Fill it up and bleed the system.
Good luck

Jul 02, 2009 | 2001 Chevrolet Cavalier

1 Answer

2001 Kawasaki ZX-6R Ninja ignition timing specs


Hi, Dskleck for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.aperaceparts.com/tech/ZX6R.html
timing on zx6r please asap KawiForums Kawasaki Motorcycle Forums
Kawasaki Ninja ZX6R Service Manual
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Feb 01, 2009 | 2001 kawasaki ZX-6R Ninja

1 Answer

Chain


Put it up on your stand lossen the axel and remove the bolt on the bottom of the shock. Then tighten your chain and lift your swingarm up until its horizontal with the ground, then the chain should have almost no play. Not completely tight, but almost no play. Tighten the axel, and the bolt on the shock, and your set,,,

Nov 10, 2008 | 2001 KTM Adventure R 640

1 Answer

Chain


Put it up on your stand lossen the axel and remove the bolt on the bottom of the shock. Then tighten your chain and lift your swingarm up until its horizontal with the ground, then the chain should have almost no play. Not completely tight, but almost no play. Tighten the axel, and the bolt on the shock, and your set,,,

Nov 10, 2008 | 2001 Husaberg Fe 600 E

Not finding what you are looking for?
2001 kawasaki ZX-6R Ninja Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5948 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

ROB

Level 3 Expert

858 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...