I have a kymco ck 125 cc and the bolt on the bottom of the engine caseing that holds the oil in has rounded of and is slowly coming loose i need to know what size it is so i can order a new bolt thanks
sean
ps
ignore the products category part i could find kymco ck 125 on it
the bike bolt size i am looking for is a kymco ck 125 cc 05 plate
thanks again
17mm m8
Fit in a helical, and keep in the same bolt, that should solve your problem
17mm head with 10mm threads
bore a 3/4mm hole as central as you can,either try to thread it,buy an easy out set,or try superglueing a pin,leave overnight and try. if no succes then boring and easy out is only way to go.
If you can bore small hole then put a nut on first, screw in like normal, use bolt to tighten to casing , then undo.
that was a 3 or 4mm hole
×
394 views
Usually answered in minutes!
×