At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Are you wanting the size of the hex bolt head or the thread size and bolt length? Most oil pan plug bolts are either 17mm (5/8th socket) or 19mm (3/4" socket) bolt heads.
Actually, they're not Hitachi carbs. Since you have a 1985 "Maxim-X", the model number is actually XJ700XN. The XJ700 does indeed have Hitachi carbs but your bike, the XJ700XN Maxim-X has BS33 Mikuni carbs.
Careful with the model number, the XJ700 and the XJ700X are entirely different bikes.
By the way, if you want more answers about your Maxim-X, feel free to visit the "Maximum Maxim-X" web site at www.maxim-x.com and the lesser known FTP site for the Maximum Maxim-X web site at www.maxim-x.com/pix
It seems the float chamber of the carbs are not getting enough fuel (gas).
Try to check this first by opening the carburator float chamber drain screws....thn select the petcock to 'prime' positon and see if theres fuel running out of those drain screws freely.If not thn it time to clean the carbs.
Not bad too to remove the spark plugs and clean them and regap.
Hope this helps!
All engines need the same three to four things to work correctly.. Compression, Fuel, Spark, (timing).... But, usually those bikes, have fuel issues. The fuel tank spigot has a vacuum controlled valve which when the engine is cranked, suction is applied and fuel then can flow. Second,, the needle and float in the carb tend to get gummed up along with the main and idle jet... You need to make sure the carb is maticulously clean, Using carb cleaner, and tag wire,, or a piece of fine wire ( be careful not to enlarge the tiny holes). Keep refering to the 3-4 list fuel, compression, Spark,,,timing..... Good luck...!! Rib
×