Question about Yamaha Road Star Midnight Silverado Motorcycles

1 Answer

I have a 2007 Yamaha silverdo 1700cc that hasn't been started for 9 months, what should I do to get it back running.?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,799 Answers

Charge the battery and give it a try. I would suggest that you turn it over with the plugs removed for about 30 seconds before you refit the plugs and try and fire it up. This will circulate oil round the cold engine and reduce the chance of wear on start up, as the internals will be dry. Once started you may like to do a complete minor service (oil, filters and check the brake fluid levels.)

Posted on Feb 17, 2013

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whats the best oil for my gear box on my yamaha warror 1700


Your gearbox and engine use the same oil probably 10 W40. You do have a transfer case section on the back of the engine that uses Sae 80 gearbox oil. Try www.rswarrior.com their formus tell you all about it.

Apr 01, 2014 | 2002 Yamaha Road Star Warrior

1 Answer

2007 Yamaha CygnusX 125 poor high-speed performance


Hi, Anonymous and the usual suspects are:
1. Inlet system air leak.
2. Enrichener valve not seated or leaking.
3. Damaged or restricted fuel tank vent system.
4. Restricted fuel supply tract.
5. Dirty or damaged air cleaner element.
6. Plugged bowl vent or overflow.
7. Worn or damaged needle or needle jet.
8. Vacuum piston assembly malfunction.
9. Loose or plugged main jets or passages.
10. Improper float level.
11. Accelerator pumps inoperative.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.o2w.co.uk/tagforum/viewtopic.php?t=6817
YAMAHA CYGNUS 2007 FUEL PUMP FAULT DIAGNOSTICS AND TEAR DOWN PART 1
Yamaha XC125 Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
Yamaha Cygnus XC125 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Jan 08, 2018 | 2007 Yamaha CygnusX

1 Answer

2007 yamaha v star 1300 idle is to high and fuel mixture to rich


Hi, Brian you may have a stuck choke and the usual suspects are:
1. Throttle cables improperly adjusted, pinched or need lubrication.
2. Idle adjusting screw needs to be backed off.
4. Air fuel mixture adjusted too lean start with 2 full turns.
5. Intake system air leak.
6. Fast idle choke ramp is not releasing.
7. Broken throttle return spring.
8. Damaged diaphragm or slide.
9. Faulty MAP, TPS, ATS, O2, sensors or wiring/connector
10. Multi carburetors not in sync.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Running rich
Erratic idle so confused Yamaha Star Forum
YAMAHA XVS1300A Owner Manual
OEM parts for Yamaha
Yamaha XVS1300A 2007 Service Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Oct 27, 2012 | 2007 Yamaha V Star 1300 Tourer

1 Answer

My 2007 Yamaha V-Star will not start. It will go into neutral but the neutral light will not turn on. It started once but when I took it out of neutral to first the bike died and hasn't started


Hi, E and the usual suspects are:
1. Fuel tank empty.
2. Fuel supply valve/petcock turned off.
3. Fouled spark plugs.
4. Engine flooded as a result of overuse of the enricher.
5. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
6. Fuel valve/petcock or filter clogged.
7. Fuel line to the carburetor or throttle body pinched or kinked.
8. Carburetor float stuck.
9. Fuel injectors clogged.
10. Severely discharged or damaged battery you need 12.5 volts or better and be able to pass a load test if necessary.
11. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
12. Loose or corroded wire connection at the coil, battery or plug between ignition sensor and CDI box.
Spark plug cables in bad condition and shorting check for leakage in the dark, cable connections loose, or connected to the wrong cylinders.
13. Ignition timing incorrect due to a faulty MAP, CKP, O2, TPS, sensors.
14. Faulty neutral, clutch lever, or kickstand safety switch.
15. Faulty fuel pump or fuse or relay.
16. Faulty CDI box.
17. A stuck bent or burnt valve.
18. Tip over sensor needs a reset.
19. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
2007 VStar 1300 cranks but wont start Yamaha Star Forum
Frustrated Yamaha Star Won x27 Start
Yamaha XVS13AWC Service Manual
OEM parts for Yamaha
Yamaha XVS13AW Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jul 13, 2012 | 2007 Yamaha V Star 1300 Tourer

1 Answer

My '97 yzf 600r will start but won't keep going


Hi, Rhiannon_mat and the usual suspects are:
1. Idle circuit and transfer ports clogged.
2. Air fuel mixture adjustment too lean.
3. Pilot jet clogged.
4. Faulty accelerator pump.
5. Float level too low.
6. Float bowl contaminated old fuel, water, dirt, rust, etc.
7. Float bowl vent or overflow tube clogged.
8. Fuel flow to carburetor restricted.
9. Intake manifold leak.
10. The gas cap is not venting properly or fuel tank venting system blocked.
11. Vacuum line from intake manifold to petcock broken, cracked, or not attached, carburetor vent line plugged.
12. Needle and seat stuck closed in the float bowl.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
03 Yamaha YZF 600R wont stay running
http://www.vfrdiscussion.com/index.php?/topic/41953-help-stranded-starts-but-wont-stay-running
Yamaha YZF600 YZF600R 1994 2007 Service Repair Manual PDF Download Manuals...
OEM parts for Yamaha
Yamaha YZF600RP Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

May 12, 2012 | 1997 Yamaha YZF 600 R thunder cat

1 Answer

Yamaha r6 2005 won't start. Display shows no error


Hi, Axios_nt and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Tip over sensor needs a reset.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Starter control circuit, relay, or solenoid faulty.
10. Main fuse or circuit breaker may be blown or faulty.
11. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
http://www.r6-forum.com/forums/57-garage-mechanical-help/129148-2005-r6-wont-start.html
R6 wont start
Yamaha YZF R6T Supplementary Service Manual
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Mar 12, 2012 | 2005 Yamaha YZF-R6

1 Answer

I have a 1985 Yamaha maxim that hasn't been ran


Spray starter into the carb intake with no choke, if she runs for a few seconds then you know its fuel starvation
clean jets & airways & blow through with compressed air

Nov 20, 2011 | 1985 Yamaha XJ 700 S Maxim

1 Answer

92 Camaro RS Stoped in driveway hasn't started since.Itb is definetly a fuel problem .Pump is not running. Checked relay Ok. Took voltage reading at plug to pump,femal side, only showing 9 volts....


It sounds like there is a problem with the power wire. It could just be a bad connection but more likely it's corrosion or a broken end at one of the plug-ins. It could also be the insulation rubbed off somewhere along the way. It's probably easiest to run a new wire from the relay back to the plug-in. Hope this helps.

Jul 19, 2011 | 1992 Chevrolet Camaro

1 Answer

Yamaha TW 200 starts but won't run.


If the bike has sat for a long period of time without being run - the gas that is sitting in the carb(s) will shellac.. Then the carb(s) would need to be cleaned and "rebuilt"..

Sep 14, 2009 | 2001 Yamaha TW 200

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

D. E. Hev

Level 3 Expert

1187 Answers

vince

Level 3 Expert

1234 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1176 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...