I have 1994 Oldsmobile Cutlass Supreme with 3.4 Liter engine. I am replacing the head Gaskets and need to know the proper torque specs for the cylinder head gaskets. My manuel only gives the initial settings. I have the tighting sequice, need the foot pounds.
Head Bolt Torque
For your 1994 Oldsmobile Cutlass Supreme (3.4L SFI DOHC):
Foot pounds (Final torque)
need to know cylinder head bolt torque specs - clearpixel.gifoads/images/clearpixel.gif" alt="clearpixel.gif" class="h_mi" />
Note:
Torque sequence --------- | 6 2 3 7 | | 5 1 4 8 | --------- Step 1: torque in sequence to 33 Ft/Lbs Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplacneed to know cylinder head bolt torque specs - clearpixel.giflled to obtain properneed to know cylinder head bolt torque specs - clearpixel.gifmg src="/uploads/imagneed to know cylinder head bolt torque specs - clearpixel.gifgif" alt="clearpixel.gif" class="h_mi" />
Foot pounds (Final torque)
Note:
Torque sequence --------- | 8 4 1 5 | | 7 3 2 6 | front --------- of engine | 6 2 3 7 | | 5 1 4 8 | Step 1: torque to 40 Ft/Lbs --------- Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque.
Want to know the engine head torque 14b.
Want to know the engine head torque 14b.
×
4,496 views
Usually answered in minutes!
torque inch pound for head bolts of holden baina 2003?
need to know procedure to remove and replace head gasket on 2005 ford freestar
need torque spec
×