SOURCE: installing handlegrips
Not sure on the Harley but on dirt bikes and atvs I blow air in the ends and they come right off.Go on the same way.
SOURCE: Harley Davidson Ultra classic handlebar replacement
1.cover the tank with towls beachtowls 2.remove switches,unbolt both ,clutch and front brake from bars,leftside grip pry under it with a flat crewdriver and spray under it with hairspray and turn on it to make it come off, right side loosen the bars and move them so when you loosen the rightside it can come right off.unbolt the bars from center of the bars
SOURCE: how to shut off alarm on a 2002 harley davidson heritage soft tai
I long push on the remote turns it on, 2 quick clicks turn it off.
SOURCE: 2002 harley davidson ultra classic setting the clock
Turn the Bike on and the Radio off and then follow the buttons on the screen. Most people think you have to do it while it is running and this does not work
SOURCE: Installing new handlebars, where are wire
One the earlier models, the handlebar connectors were down under the tank. But, Harley changes electrics every year so you never know. All I can tell you is "follow the wire".
838 views
Usually answered in minutes!
×