Question about 2009 Yamaha WR450F

1 Answer

2009 wr450f-what is the valve clearance? - 2009 Yamaha WR450F

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Yamaha Master
  • 59,262 Answers

Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Help need on WR450F valve clearance results
How to check valve clearances and how to shim them PART 1 Watch in HD
Yamaha WR450F 2009 Owner Service Manual
OEM parts for Yamaha
YAMAHA WR450F Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Posted on Feb 01, 2017

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
emissionwiz

Marvin

  • 85206 Answers

SOURCE: What is the proper valve

.004"-.006" on both Intake and Exhaust. Better a bit loose then tight.

Posted on May 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2009 Honda CB 150 Unicorn valve clearance


Hi, Joy for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How to Check and adjust valve clearances on the CBF125
Unicorn tappet setting Unicorn timing China Hero Honda tappet sound
Thread Honda Unicorn PDF Owner Service Manual
https://www.partsfish.com/page/oem-parts-for-honda
https://www.xbhp.com/talkies/help-me/35329-can-i-get-honda-unicorn-user-manual.html

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Jun 23, 2018 | Honda Motorcycles

1 Answer

2009 Bajaj Pulsar 200 DTSi valve clearance


Hi, Vipin for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Bajaj, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Tappet Valve Clearance Adjustment for Bajaj Pulsar 200NS
Pulsar 200 DTS
Bajaj Pulsar 180 DTSi Workshop Manual
http://nexgenbikes.com/site/wp-content/uploads/2013/06/Pulsar-200-NS-Spare-Parts-Catalog.pdf
Pulsar 200 NS Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Feb 10, 2018 | 2009 Bajaj Pulsar 200 DTSi

1 Answer

Valve clearance for 2008 Rmz 450?


The valve clearance when cold is
intake 0.009 - 0.016 mm (0.004-0.0006) inch
exhaust 0.17- 0.24 mm (0.007-0.009) inch
This is for a 2009 model don't know if engines are same or if they changed following year.

Jun 01, 2015 | 2008 Suzuki RMZ450

1 Answer

I have a 09 accord and it is making a ticking noise when I accelerate between 1500-3000 rpms, had the valves adjusted and that didn't solve the noise


you check clearance cam shaft.if your cam shaft big clearance.you need fix clearance.the noised your engine or valve any particular of that clearance can be taken your car really ticking very noised mom?before your rally worn out.

Apr 18, 2015 | 2009 Honda Accord

1 Answer

Valve clearance


you can get a workshop manual here
http://www.bcmtouring.com/imp/Pulsar_DTSi_Workshop_Manual.pdf

Jun 03, 2014 | 2009 Bajaj Pulsar 200 DTSi

1 Answer

Bought a new battery and my bike still won't turn over


Hi, Anonymous and the usual suspects are:
1. Fuel tank empty.
2. Fuel supply valve/petcock turned off.
3. Fouled spark plugs.
4. Engine flooded as a result of overuse of the enricher.
5. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
6. Fuel valve/petcock or filter clogged.
7. Fuel line to carburetor or throttle body pinched or kinked.
8. Carburetor float stuck.
9. Fuel injectors clogged.
10. Severely discharged or damaged battery, you need 12.5 volts or better and be able to pass a load test if necessary.
11. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
12. Loose or corroded wire connection at the coil, battery or plug between ignition sensor and CDI box.
Spark plug cables in bad condition and shorting check for leakage in the dark, cable connections loose, or connected to the wrong cylinders.
13. Ignition timing incorrect due to a faulty MAP, CKP, O2, TPS, sensors.
14. Faulty neutral, clutch lever, or kickstand safety switch.
15. Faulty fuel pump or fuse or relay.
16. Faulty CDI box.
17. A stuck bent or burnt valve.
18. Tip over sensor needs a reset.
19. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Wr450f won start with new battery
wr450f electric start not working help
Yamaha wr450fb Owner Manual
OEM parts for Yamaha
Yamaha WR450F 2009 Owner Service Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

May 03, 2014 | 2008 Yamaha WR450F

1 Answer

Valve clearance for 2009 XJR 1300 Yamaha


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
valve clearance
Checking Valve Clearances Workshop Help
Yamaha XJR1300 2007 Service Manual
OEM parts for Yamaha
Yamaha XJR1300 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jan 20, 2013 | Yamaha XJR 1300 Motorcycles

1 Answer

1999 Yamaha WR 400 valve clearance


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
1998 wr 400 valve clearance specs
How to check valve clearances and how to shim them PART 2 Watch in HD
YAMAHA WR400F Owner Service Manual
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-wr-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Oct 03, 2012 | 2011 Yamaha WR450F

1 Answer

2009 Kawasaki ER6n how do I adjust the valve clearance


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Kawasaki ER 6n Service Manual Valve Clearance Adjustment
Valve Shim Adjustment 2012 Kawasaki Ninja 650
Kawasaki ER 6n Service Manual
OEM Parts for Kawasaki
Kawasaki ER 6n Owner Manual

Jun 24, 2012 | 2009 kawasaki ER6n

1 Answer

2009 Kawasaki KX250F valve clearance


Hi, Roger6079 for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2009 kx250f valve clearance issue
KX250F Valve Adjustment
Kawasaki KX250F Service Manual
OEM Parts for Kawasaki
2009 Kawasaki KX250F Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Nov 27, 2010 | 2009 kawasaki KX250F

Not finding what you are looking for?
2009 Yamaha WR450F Logo

Related Topics:

280 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

vince

Level 3 Expert

1234 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1176 Answers

Israel Pineiro Jr

Level 2 Expert

165 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...