I recently bought a znen Q retro 50cc scooter and im trying to find out were the speed restrictor is on this bike if anybody had this problem and solved it please E- MAIL me at [email protected] thanks
SOURCE: repairing a sym euro jet x 50cc scooter all aspects
Hello
Is it a GY6 Motor?
Go to www.scootdawg.com this forum should have wat you need also www.scooterrebels.com as well
Best Reguards
Larry
SOURCE: Direct bikes scooter wont start
have dafier qt 50 starts first time on kick start,do a run about 10 miles runs ok, turn of motor, then it is very hard start.
SOURCE: Znen Scooter Headlight keeps burning out!!!!
sounds like you have too much voltage coming out from your battery, mabey a faulty regulator. The easiest way to test this, is to get a multi - meter, and check the volage output at the battery, with the engine running, at idle should read about 12.5 - 13 volts. Then rev the bike up, and seeif the reading changes, it should not go more than 13.8 or 14 volts max. If it does, then i say you have a faulty regulator/ rectifier.
SOURCE: I just bought my 50cc
You don't " get a cylinder cleaned ". Who ever says that doesn't know what he is talking about. I assume the engine is a two stroke. The gas/oil mixture should be 32 to1. That means 4 ounces of two stroke engine oil to one gallon of gas. If the scooter has an automatic oil pump be sure there is oil in the oil tank. It should automaticly pump the engine oil at the proper rate. If this is an older scooter, you could remove the cylinder head and de-carbon it and then check the exhaust port to be sure the port has not been made smaller due to carbon build up. The port should be about 1/2" tall and 1" wide. Also check and clean the air filter. If it is a new scooter is it still under warranty?
248 views
Usually answered in minutes!
×