2006 Suzuki GSX-R 750 Logo

Related Topics:

Posted on Jan 11, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Place in gear and bike dies

Took the bike out for a ride (about two miles), came home, parked it in driveway. An hour later went to put in garage, pulled back on clutch placed in gear, keeps dying.

Answer This Question
  • shyco1 Jan 11, 2009

    My 2008 grsx - I was driving my bike with no problems then today I tried to put it in first while holding down the clutch lever and it just grinds a gear then dies like the clutch lever was never pressed.

    i put the bike in neutral and it moves fine. if i put it in first without touching the clutch lever it wont move like usual but if i press the clutch lever the bike moves but harder like clutch is half engaged.

  • Anonymous Mar 23, 2014

    bike stopped took plug out and has water on spark plug

×

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points
MVP:

An expert that got 5 achievements.
Governor:

An expert whose answer got voted for 20 times.
Hot-Shot:

An expert who has answered 20 questions.

  • Expert 88 Answers
  • Posted on Jan 11, 2009
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points
MVP:

An expert that got 5 achievements.
Governor:

An expert whose answer got voted for 20 times.
Hot-Shot:

An expert who has answered 20 questions.

Joined: Jan 08, 2009
Answers
88
Questions
0
Helped
32906
Points
183

If your kickstand is down it will die on you.

  • Anonymous Jan 11, 2009

    So you hold in the clutch and its in 1st and you let the clutch out and it dies? Maybe your clutch lever needs to be adjusted? Its a 2008, i would say take it back to the dealer, its under warranty.

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0answers

Why is the motor dying when put in gear?
Read full answer
Be the first to answer Mar 01, 2016 • Honda VTX 1800 Motorcycles
0helpful
1answer

Brake fluid leaking heavily when applying brakes
you broke a brake line this is my linkhttps://www.facebook.com/TedsRepairs
Read full answer
Nov 13, 2012 • 2000 Pontiac Grand Prix
0helpful
1answer

My 2002 Saturn SL2 has 61,000 miles at 8.5 years old. I've always done scheduled maintenance and taken good care of it, and it lives in my garage at night. Last Sunday, it stalled out twice in a row...
FIND A NEW SHOP to work on your car , I suspect the guys who replaced the water pump are incompetent rip off artists.
Read full answer
Feb 06, 2011 • Saturn SL2 Cars & Trucks
0helpful
3answers

I have a 2004 V-6 Ford Escape. Replaced the battery 2 months ago. It's dying on me now. Jumped it this morning...drove to work...OK. Car sat for about 4 hours, started fine to go to the gas station. ...
replace the alternator,this is the problem,please rate thank you.
Read full answer
Jul 28, 2010 • 2004 Ford Escape
1helpful
1answer

'06 vtx 1300 c : engine dies when put into gear
You have one of two things going on. (1) You need to check the kick stand switch, your bike thinks the kick stand is still down. It may have been loosened out of adjustment by vibration. If the kick stand switch is out of whack, it will restart as long as the clutch in pulled in. But as soon as you try to let out the clutch it will kill the engine, if it is in gear. (2) Next problem could be, you need to loosen up the clutch cable a little bit, The clutch control on the handle bar has a screw type of adjuster (clutch cable passes through it ), try loosening it till it's easy for you to move the bike without the engine shutting off. Hope it helps and comment if you need more clarification.
Read full answer
May 08, 2010 • 2006 Honda VTX 1300 S
0helpful
1answer

2003 Ford Windstar Transmission will not go into gear. Ran fine on way home, parked in driveway few hours later went to leave put it in reverse got into street went to put in drive and it would not...
have it scanned, could be as simple as a mlp sensor...manual lever position. or what ya dread, a overhaul
Read full answer
Jan 22, 2010 • 2003 Ford Windstar
0helpful
1answer

I have an 04 yamaha v star silverado classic cruiser with a stalling no start issue! here is what happens i recently installed new battery connections cleaned and tighten and took bike for a drive while...
It's your stator failing, these bikes are notorious for bad stators. A failing stator means the bike can't produce the electricity it needs to run, and the bike is running on the battery only. Replace the stator and make sure your battery is fully charged and you will be good to go.
Read full answer
Sep 01, 2009 • 2004 Yamaha V Star Silverado
4helpful
1answer

Triumph Adventurer 900 goes bang and stalls when put in gear!
is it three cylinder
Read full answer
Jul 14, 2009 • 1996 Triumph Adventurer
0helpful
1answer

Bike shut off when riding.
Hi and welcome to FixYa,

Your description indicates an electrical malfunction. Offhand, the jump start and charging is significant. This points to the bike's battery not charging. Suspects would be:
  • voltage regulator (most likely);
  • connectors to voltage regulator (likely). Check/clean corrosion/burnt marks;
  • stator and/or the 3 wires coming from it (least likely).
Good luck and thank you for using FixYa.
Read full answer
Feb 25, 2009 • 1998 Suzuki GSX-R 750 W
0helpful
1answer

2003 XK8 won't start
Remove plugs, clean and dry(warm) them and try again-common fault
John
Read full answer
Jan 03, 2009 • 2005 Jaguar XK8
Not finding what you are looking for?

View Most Popular

2006 GSX-R 750

  • Motorcycles

Related Question

Why is the motor dying when put in gear?

  • Honda VTX 1800 Motorcycles

Related Topics

337 views

Ask a Question

Usually answered in minutes!

Popular Questions

Need to know which wires hook up the temp sending unit , on a 1992 Gsxr 750

Suzuki GSX-R 750 Motorcycles

F1 code on my 05 suzuki gsxr 750

2005 Suzuki GSX-R 750

Oil type do i put in gsxr 750 2001

2001 Suzuki GSX-R 750

I pull the clutch lever and it wont disengage.

2004 Suzuki GSX-R 750

Hi , i have a c93 error code on a 2009 suzuki gsxr

2007 Suzuki GSX-R 750

Top Suzuki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Bob G

Level 2 Expert

104 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...