SOURCE: harley engine wont idle
Your bike has an idle screw on the carb. looking at carb its on the right side turn to the right to bring up your idle.
SOURCE: Will a '06 softail springer (FXSTS/FXSTSI) front
Sorry,I'm not up on newer hogs but here goes.Borrow or buy shop manuals and get spec on length of spindle.It's welded to bottom tree.If both models have same length it'll work.Check dia.of shaft cause bottom bearing is pressed on.If all measurements check out you can leave bearings in place.Shaft threads may be different so you'll have to use springer nuts.The only modification if all goes well would be brake hoses tor calipers.Length?In the old days you could swap out shafts but now you're talking modificatrions with a capital M.
Testimonial: "Thanx for your input."
SOURCE: Directions from start to finish
http://www.jpcycles.com/product/380-879
Jp has the harness and easy to follow instructions, if you already have
the harness, and the old one is still on the bike. you could strip down
and tag each wire before pulling harness . use old harness to apply
new harness , everything will be the same. some connections may
need to be added, but this is minor .
195 views
Usually answered in minutes!
×