Motorcycles Logo

Related Topics:

Posted on Oct 01, 2012
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Main 30 amp fuse on Hyosung GV650 Aquila Classic keeps blowing. Started when riding slow at first and turning handlebars left and right around obstacles. First electronic speedo went blank, bike stalled but electronics came back on instantly. Started no dramas but same thing happened again. Stopped bike for a bit and then started up no dramas again. Rode about 5km no dramas and pulled into a driveway where fuse must have blown completely. Changed fuse and started again no dramas. Got home and same thing again. Blown completely. Could the turning of the handlebars have pinched a wire? Help would be appreciated!

Answer This Question

1 Answer

wtdash

Level 3:

An expert who has achieved level 3 by getting 1000 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Vice President:

An expert whose answer got voted for 100 times.

  • Master 606 Answers
  • Posted on Oct 02, 2012
wtdash
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Vice President:

An expert whose answer got voted for 100 times.

Joined: Mar 10, 2010
Answers
606
Questions
2
Helped
238813
Points
1884

HI,
Need to trace/follow the wires down the frame from the gauges. Sounds like a short/pinched wire.
GL,
Td

1 Related Answer

Rasputin666

  • 413 Answers
  • Posted on Mar 20, 2012

SOURCE: Can a bad voltage regulator cause the main 30 amp fuse to blow?

Usually a bad regulator will only cause problems with charging...
Sounds like you've got a short somewhere in the wiring...I'd start by checking the ignition switch wiring and the connections going into the fuse box.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

No Display Lights on Hyosung GV650
i know this may seem drastic
but in my experience i have found that the Chinese electric connectors are normally at fault
first thing i would do is chop the connection block out and either put your own bullet connectors in
or solder the wires together
either way it is the connector at fault and needs replacing
Read full answer
May 20, 2022 • Hyosung Motorcycles
0helpful
1answer

Hyosung GV650
could be a bad wire(s) that have created lots of resistance
Read full answer
Dec 30, 2018 • Motorcycles
1helpful
1answer

I have a 2010 hyosung GV650 Aquila, battery wont hold charge, FI light comes on and bike stalls.
sounds like stator and/or voltage regulator has had it. hard to say which one. i would first check that there is sufficient voltage over all 3 phases coming into the regulator and then the regulator post exit voltage.
Read full answer
May 15, 2016 • Hyosung Motorcycles
0answers

Hyosung GV 650 Aquila how to replace the fuel tank
Read full answer
Be the first to answer May 07, 2015 • Hyosung GV 650 Aquila Motorcycles
0helpful
2answers

Oil change 2008 hyosung Aquila gv650 se
First of all let the engine run for at least 15 mins to warm up at the running temperature. Then turn it off and let it set for 10 mins. The reason is when the oil is hot it becomes thinner and 98% of the oil will drain. Now find the lowest part of the engine and there should be a bolt of spanner or socket 17mm or 19mm. Take it out and the oil will drain. let the oil drain for 10 mins and put the bolt back in, Tight it well and pour the oil from the top oil cap.
Read full answer
Aug 24, 2014 • 2009 Hyosung Avitar GV650 SE
0helpful
1answer

Main 30 amp fuse keeps blowing when i plug the 4 wire fuse top back on after replacing 30 amp fuse. any suggestions
under your seat there is a bunch of wires 3 of the yellow i think wires goes to a pigtail thats the wiring harness for your stator and rectifier i had 03 1100 spirit shadow and 1 day i was riding and it jus quit on me i finally got it home broke it down n noticed the fuse kept popping every time i changed it then i found the melted pigtail looking for a short so i cut pigtail out straight wired each wire an never had a problem since.
Read full answer
Jul 14, 2017 • 2003 Honda VT 1100 C Shadow Spirit
0helpful
1answer

Forward controls are too far forward, im 161 cm tall. what options do I have? i am riding the hyosung gv 650 cruiser 2006 model. what can i purchase and where from in order to modify? or how far back can...
Have you tried extended pedal arms?
Read full answer
Dec 18, 2010 • Hyosung GV 250 Aquila Motorcycles
0helpful
1answer

Electric fan on my 2006 GV650 is not turning in
there is a sensor on the radiator some where , unpug it an test with a ohm meter an see if its make..if not replace it..
Read full answer
Apr 23, 2010 • 2003 Hyosung GV 250 Aquila
10helpful
3answers

As soon as i put the bike in gear it stalls with
This problem should be re-tagged gv650.

It's not your clutch, it's the kickstand killswitch. I had the same issue.

If you look down next to your kickstand on the left hand side you'll see a silver switch (looks like a mushroom), follow the cables up to the front end of the chasis near the sump and you'll find a black connector with two wires coming out of it. You can either bypass the connector using a piece of wire or just do what I did and clip the wires, wind them together and crimp them in a connector.

Start your bike and hey presto - problem solved.

Hope this helps.
Read full answer
Apr 18, 2010 • 2003 Hyosung GV 250 Aquila
Not finding what you are looking for?

View Most Popular

Motorcycles

Related Question

No Display Lights on Hyosung GV650

  • Hyosung Motorcycles

1,100 views

Ask a Question

Usually answered in minutes!

Popular Questions

2003 sportster wont start or run right when it is warmed up

2000 Harley Davidson XL 1200 C...

Need to know which wires hook up the temp sending unit , on a 1992 Gsxr 750

Suzuki GSX-R 750 Motorcycles

Carburetor adjustments yamaha 450yfz 2004

2004 Yamaha YZ 450 F

What does f1 mean when it flashes where the temp guage is?

2004 Suzuki GSX-R 600

Hav tv

1988 Suzuki Rg 250

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66832 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
Harris Hayley 201607151850070619.pdf....

2004 Honda VTX 1800

PDF Manual
Honda_CBR_750_Parts_Manual.pdf....

1988 Honda CBR 750...

PDF Manual
Vl800.pdf. user-manual-2006 Boulevard...

2006 Suzuki...

Loading...