2004 BMW 330xi . how to reset oil service indicator

SOURCE: Reset oil change indicator on BMW 525 2006

BMW requires a scan tool to reset the light.

Jeffery Lewis

• 329 Answers
• Posted on May 28, 2009

SOURCE: BMW528i 1999-How do you reset oil service light after oil change?

With the key in the ignition but in the off postion press and hold your odometer trip button in then turn your key to the first postion hold the trip button in for 5 seconds the display will read oil service or inspection then it will say reset release the button and then press it again untill the reset starts to flash then release and press the button briefly to reset

Radio Code Pro

• 2200 Answers
• Posted on Jul 29, 2009

SOURCE: I have a 2003 BMW X5, how do I reset the service indicator?

Hi,

You can reset your service indicator, as follows:

1. Get in the car, close the door, buckle the seatbelt.
   
2. Push in the clutch pedal and hold it to the floor
   
3. Press the left hand dash button (the one that resets your odometer) and hold it down
   
4. Put the ignition key in the key slot, and turn it gently (very gently) until the dashboard lights come on - the key will not click - if it clicks you've gone too far and you have to start again. Hold the key in this position. In five seconds or so, the dash will display "SIA" and some other characters. Do not proceed until this happens.
   
5. Release the dash button (and only the dashboard button) and then press and hold it again. In another 5 seconds or so the display should begin to flash "RESET?" Do not proceed until this happens.
   
6. Release the dash button and push it again to confirm. You won't need to hold it - the display should change immediately and your service indicator will display five green LED's.