R1 2000 model just replaced battery and plugs but still wont start
I would double check your battery FIRST. It could be a bad starter, but typically if it is clicking it might just be your battery. The least expensive and quickest solution is to hook it up to a charger, and see how it does. Cheers
Hi and welcome to FixYa,
Your description could be any of 2 possibilities:
To determine which, jump the 2 bog terminals of the starter relay when starting the bike; if the motor turns, the relay/solenoid is defective; if the starter motor does not turn, the starter motor is defective (most likely the carbon brushes).
To determine the location of the starter relay/solenoid, follow the clicking sound and would look like the image below.
While the starter motor would look like this
Good luck and Thank you for using FixYa. Happy Holidays.
Of course other possibilities still exist, such as:
Cheers.loose, corroded battery, relay, starter terminal/connectors;
weak battery.
open, corroded fuse/fuse terminals.
Glad to be of assistance and appreciate the rating.
but my scooter is'nt making a clicking sound, it won't make any sound.
×
2,315 views
Usually answered in minutes!
turned out to be the solenoid thnx for the help
My R1 wont start either, just clicks and the Nuetral light goes out. I pound on the seat a bit and the light comes back on but still wont start. I been push starting it everyday and its getting kind of old please help!!
I have just changed the battery on my 2007 R1 and there is no power whatsoever. Is this the fuses?
×