My bike is the F1, F4i although it's registered in 2002. After replacing my Honda original downpipes with Delkvic the bike has been hesitating before accelerating and there are flat spots while running, sounds ok whilst idling but when on the move it boggs. I was told it was because I used aftermarket pipes instead of Honda and because the bike is injected. Are there any that will do the job other than Honda parts?
SOURCE: Setting the clock
turn on the key, press both buttons until the time flashes, set the time then turn of the key AFAIK
SOURCE: Fuel leaking into crankcase on 2001 Honda CBR 600
it's probably leaking from the carb and down the cylinder into the crankcase.
it is probably due to a stuck float in the carb. take the float bowl off and make sure it is clean. the float can also be full of gas not letting it float up and stop the gas flow. the carb will fill up and leak wherever it can which is likely the case
148 views
Usually answered in minutes!
×