Motorcycles Logo

Related Topics:

A
Anonymous Posted on Jul 27, 2012

Rieju rs3 speedo & rev counter

My rs3 speedo & rev counter has stopped working.. when i put the key in to start bike the clocks all lights up..any help..?

  • Jeremy
    Jeremy May 15, 2016

    My RS3 has the same problem . Have you managed to fix yours yet?

×

5 Related Answers

Anonymous

  • 55 Answers
  • Posted on Nov 23, 2008

SOURCE: speedo and rev counter not working

make sure your clip i the back is in all the way.

Ad

lapum0nz

  • 18 Answers
  • Posted on May 11, 2009

SOURCE: my rev counter, speedo, fuel gauge and temp gauge

try to check yor meter conection at the rear of your meter.there is a loose connection due to vibration

Darran Hatten

  • 236 Answers
  • Posted on May 25, 2009

SOURCE: cbr 125 rw 7 instrument panel

Sounds like you have a ground fault. I once had a car with a faulty ground wire on the headlight, when I put high beam on the speedo would jump to 170km/h and the indicators would glow dimly. Sure sounds like a similar ground fault to me, check all the ground straps, from the headlight or anywhere else you can think of.

Anonymous

  • 375 Answers
  • Posted on Jun 29, 2009

SOURCE: my 2003 BMW R100S SPEEDO AND REV COUNTER IS NOT

I would check your fuses - you may have arced when changing and it has blown a fuse that runs the dashboard.

Anonymous

  • 190 Answers
  • Posted on Jul 15, 2009

SOURCE: No electric to start YZF R1 motor bike,

check kick stand safety switch is working proper

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Bike misfiring after flywheel change

The timing gut messed up by a tooth skip on timing chain or some othr mistake. Do uhav a shopbook for that model or some similar guide. Also the computer cud hav issues with plugins or harness wire
0helpful
3answers

I bought a rieju rs3 125 and I was riding it, as I stopped to turn it off, and tried to turn it back on again there was no lights on the speedometer pretty much like the battery went dead but it couldn't...

It depends how old the rs3 is. Sometimes a faulty voltage regulator can cause dash issues. Might be Worth checking this first. Could be a cheaper fix.
0helpful
1answer

Issue with clocks on 1998 have clock display and fuel/oil/high beam indicators

Get a multimeter and check for power and ground if it has power and ground it is the clock you can check for power at all the indicators
0helpful
1answer

Rieju RS3 loses engine power

Put some BG or amsoil PI in tank..littl ata time
0helpful
1answer
1helpful
2answers

01 jetta 1.8t odometer and clock stoped working any ideas

abs light on ? abs controls the speedo (odometer).... dont know what you mean by clocks.... do you mean the rev counter and gauges ??
6helpful
2answers

Engine warning light , battery light, warning light , rev counter , speedo and temp gauge going on/off intermitantly and speedo not working on digital screen on ford focus can you help. the battery is new...

My 04 Ford Focus the battery light keeps coming on & going off, have fitted a new alternator belt but it didn't solve the problem. The battery connections are good. Also the rev counter, speedo & mileage clock keep going haywire when the battery light is on. Do you think it is the alternator? Or is it some other common problem?
2helpful
2answers

Cbr 125 rw 7 instrument panel

Sounds like you have a ground fault. I once had a car with a faulty ground wire on the headlight, when I put high beam on the speedo would jump to 170km/h and the indicators would glow dimly. Sure sounds like a similar ground fault to me, check all the ground straps, from the headlight or anywhere else you can think of.
0helpful
1answer

Digital speedo jumping randomly up to299kmh not reading correct

The speedo drive sender is very common failure on these bikes following any maintenance involving the front wheel removal (like tire replacement) 
The speed sensor is located on front axle on the right side of the wheel 
The magnetic rotor gets broken because the drive detent is not properly engaged duing re-assembly. 
Fortunately the replacement is relatively inexpensive and reasonably easy to replace if you are careful to engage the drive properly when re-installing wheel. Insert the drive into the wheel before bringing wheel up to forks and inserting axle. 
0helpful
1answer

Rev counter needle

HAVE YOU TRIED DISCONNECTING THE BATTERY & RECONNECTING THE BATTERY THIS SHOULD RESET REV COUNTER.
Not finding what you are looking for?

938 views

Ask a Question

Usually answered in minutes!

Top Rieju Experts

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39387 Answers

Are you a Rieju Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...