Battery has went flat on my tdm ,what do i need 2 remove 2 gain access 2 the battery ,
Hello! I used to own a 1991 XTZ (Off road version of your TDM) And the battery if I remember is behind the right side panel, these are a push fit so be careful when pulling them off. Gently pull towards yourself one edge at a time, If not right side try left. You'll be investigating under your seat too as there should be a tool kit in your tail piece to help remove battery.
Merry Christmas ans remember push the Blue FixYa button!
Paul 'W'
Onyer~EDson(:0)~[><
Batteries under the fuel tank mate.
remove seat , undo four bolts at the front end of the tank and the one bolt at the back of the tank. dont need to remove tank , just lift back end and prop up with something of convenient height . earth and live bolts to the battery are 10mm , undo and lift battery out. . if you still have the fairing fitted you will need to remove bottom half for access to the four bolts holding tank down at the front . two either side bolting down the rubber sandwich.
thanxandy
1,190 views
Usually answered in minutes!
the battery sits within a case on my tdm behind the rear shock i have had the tank off but still can"t gain access,is this a case of removing the shock
did you get this sorted if so can you post details how thanks in advance
the battery is in a different place .i think you have to drop the mono shock spring then you have a clear access
×