SOURCE: 93 Dyna low rider fork oil.
your local hd shop should be able to answer this for you as its a mesured amount and to much or too little will make the bike not handle right
SOURCE: Add transmission fluid to 2001 Harley dyna low rider
the tranny plug is behind the oil spout its usually a big allen head bolt. You should use a quality oil like AMSOIL 20W50 motorcycle oil or AMSOIL gear oil. I have the 20W50 in mine and really like the benifit of not having a pultrolium product in my bike. You can get the AMSOIL online a http://hbsynlube.com/sales. You'll beglad you changed it.
SOURCE: how do you remove battery from dyna low rider
I have an early model and I think they're still the same in that area. There are two bolts on the right side of the battery support. Loosen these two bolts and the battery will drop down a bit allowing you to remove the battery top cover and front cover.
SOURCE: What is the fork oil capacity for a 2004 Dyna Low
If I am not mistaken. You will need ten ounces per side ounce you have completely drained them
SOURCE: how to remove starter clutch on a 1998 Dyna Low
The starter clutch is an integral part of the starter assembly itself. You must remove the starter and disassemble it to get the "overrunning clutch" out. First take the starter off the bike. Then, remove the two long bolts and take the starter motor off of the drive housing. Then remove the bolts that hold the drive housing together. The overrunning clutch will come out of the drive housing. You will probably have to take the bearings off the original clutch and reinstall them on the new part. Reassemble the starter and reinstall it on the bike.
256 views
Usually answered in minutes!
×