Question about 2007 Yamaha V Star 1100 Classic
Hi, Howard for more information about your question and valuable "FREE" downloads that you will need please click on the websites below. Good luck and have a nice day.
Hoping you guys have some info on vStar 1100
Re oil blow by from air filter Road Star Forum Yamaha Road Star
OEM parts for Yamaha
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e
Posted on May 21, 2016
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
On the right side of the bike (right side when ou are sitting on it) just above the rear brake lever behind a small circular plate. remove the plate and the oil filter is inside (you will easily see it). Warning---on these bikes you have to drop the front exhaust header and right floor board in order to change the oil filter unless you install a after market oil filter relocation kit. If you plan on changing your own oil it is highly recommended to install this relocation kit.
Posted on May 15, 2009
I too had this popping back fire on my 2004 Yamaha 1100 custom.
Seems the AIS system is causing this.
This site has an excellent PDF file and instructions.
There is also a simple way to block of the AIS without stripping it off the bike. Reversible too!
(Usually my first choice to see if the desired results are achieved.)
Loved my BUB pipes too!
Posted on Oct 04, 2009
It is part of a detent mechanism for the choke. No, all 4 carbs do not have them, only 1.
Here is a link to Yamaha's website, where you can pull up a diagram of your bike's carbs. The ball is #10 and there is also a spring with it.
They are saying there are 2 balls and 2 springs, but I do not remember them having 2. I also don't see another #10 or #11 on the picture anywhere. You should be able to look at the rod that connects all the chokes together and see if there are 2 sets of dimples for the balls. Obviously there will be one set in carb #1, if you find another set of dimples for a detent ball, then there indeed would be 2. Also, the carb body would be drilled for the spring and ball like the #1 carb is.
Posted on Oct 05, 2009
Fuel over flow is normally caused by dirt getting into the fuel lines and blocking the valve in the float bowl. The reason that if wont fire is because there is too much fuel in the engine and it is flooding.
Turn the fuel off and remove the carb.
take off the float bowl and remove the float. held in by a bar.
check the valve and blast compressed air into the valve seat to clear any debris.
Rebuild the float bowl but do not put the case back on yet. a simple test to see if it has worked is to gently hold the float whilst blowing down the fuel line.
As you move the float up and down by hand it should be harder or easier to blow, resulting in a complete stop when you close the valve completely. (BE CAREFUL NOT TO APPLY TOO MUCH PRESSURE TO THE FLOAT BOWL)
as this could bend the float. Once happy with the operation of the float, replace the case and install back on the bike.
Please reply if this does not fix the problem.
Posted on Apr 06, 2010
Testimonial: "Haven't tried it yet but this was very helpful and will do what you instructed. Thank you"
Tips for a great answer:
May 20, 2014 | 2007 Yamaha V Star 1100 Classic
Apr 22, 2014 | 1999 Yamaha V Star 1100 Custom
Apr 12, 2014 | 2007 Yamaha V Star 1100 Custom
Dec 03, 2013 | 2007 Yamaha V Star 1100 Custom
Sep 06, 2013 | 2004 Yamaha V Star 1100 Classic
Aug 17, 2013 | 2005 Yamaha V Star 1100 Classic
Apr 29, 2012 | 2007 Yamaha V Star Classic
Apr 10, 2012 | 2001 Yamaha V Star 1100 Classic
Oct 04, 2010 | 2007 Yamaha V Star 1300
Aug 09, 2010 | 2007 Yamaha V Star 1100 Classic
118 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: