Brake light works but running light doesn't work

Look Behind the triangle panel on the left side of the bike. Next to the battery. FUSES

sounds like fuse, is a different fuse to brake lights

does both hand brake and foot brake lever not light the bulb? might be the bulb... Bub!

take a test light and make certain your getting power to the socket. could be a bad socket

They are part of the dome light circuit, so if the bulbs are ok you'll have to check the wiring fuse and switch.

You will need to get that one headlamp working,The daytime running light module alread recieves the signal that the light are off.And the brake switch signal is not being pick up by the daytime running light module.

AutoZone has free diagrams on-line.
Sounds like a short in the brake light switch or at the bulb sockets themselves.

Check the light bulb. Chances are that the brake light filament is burned out but the running light filament is still good. If the bulb checks out okay with a multimeter, check the brake light switch and the wire connectors..

First let's determine which brake lights are not working. Does the high mounted brake light work? Do both left and right brake light not work? If none of the brake light work, the problem could be the brake light switch at the brake pedal OR fuse #12 in the underhood fuse panel.
If only the bake lights at the corner lamp assembly don't work, check fuse #34 in the rear fuse panel.
The module your are referring to is the circuit board located in each of the corner lamp assemblies, check on website www.compnine.com for the part number of this item. I don't believe this is your problem though.

The first step is to check the bulbs in the tail lights. The brake light switch (on the brake pedal) is OK, as the center light works.