Hi and welcome to FixYa,
Absence of 2T oil in the reservoir in a two stroke engine is always bad news. Probable cause of no start:
- oil level sensor knows no oil, triggers CDI not to fire, pls check if you have spark at the plug;
- if the engine was run previously with no 2T oil (unknown to you), then it is possible to have broken rings. You can check compression by removing the plug and covering the hole with a finger. Start and determine if their is compression strong enough to push your finger away from the hole and produce a pressure release sound;
- if there is spark and compression is good, you may need to de-carbonized the cylinder head and the top of the piston.
Just a start, do postback how things turned up or should you need additional information. Good luck and Thank you for using FixYa.
×