Camshaft cap bolts torque settings

SOURCE: Need torque wrench settings for cylinder head bolts

try here http://www.manualz.info/

hope this helps

SOURCE: head bolt torque

Hi bengriffith1
You can download a copy of the engine manual from here
It has all the info you need. Any problems with the download just let me know
regards robotek

Arnie Burke

• 7339 Answers
• Posted on Sep 05, 2009

SOURCE: camshaft timing setting

wat u really need is a clymer manual for that ride-online or a bookstore near u

SOURCE: what is the torque settings

Be more specific, they are not the same for all of them. What model? 10 NM or 7.37 ft.lbs. is a number Yamaha uses often but I would like to be more specific.

SOURCE: what is te torque specs for the camshaft retaining

Thanks for contacting FixYa. I was reviewing some of the older un-answered questions trying to ensure your issue has been resolved.

KTM Torque settings

1. Collar screw, front wheel spindle Front axle nut 40Nm 30ft lbs
2. Brake Caliper front Brake Caliper front Loctite 243 2 19ft lbs
3. Brake Disk, front Brake disk front Loctite 243 1 11ft lbs
4. Brake Disk, rear Brake disk rear Loctite 243 1 11ft lbs
5. Clamping screws, upper fork bridge Top triple clamp 20Nm 15ft lbs
6. Clamping screws, lower fork bridge Bottom triple clamp 15Nm 11ft lbs
7. Clamping screws, fork stubs Front axle pinch bolts 10Nm 7ft lbs
8. Collar nut, rear wheel spindle Rear axle nut 80Nm 59ft lbs
9. Hex nut swingarm bolt Swingarm nut 100Nm 74ft lbs
10. Hex collar screw handlebar clamp Upper handlebar clamps 20Nm 15ft lbs
11. Allen head screw handlebar support Lower handlebar clamps Loctite 243 4 30ft lbs
12. Shock absorber top Shock absorber top bolt 60Nm 44ft lbs
13. Shock absorber bottom Shock absorber botton bolt 60Nm 44ft lbs
14. Sprocket screws Rear sprocket bolts Loctite 243 3 25ft lbs
15. Ball joint for push rod Rear brake pedal pivot Loctite 243 1 7ft lbs
16. Engine mounting bolts Engine mounting bolts 45Nm 33ft lbs
17. Engine brace Engine brace 33Nm 24ft lbs
18. Screw adjusting ring spring preload Shock preload collar bolt 8Nm 6ft lbs
19. Spoke nipple Spokes 5Nm 4ft lbs
20. Other Screws on chassis M6 10Nm 7ft lbs
21. M8 25Nm 19ft lbs
22. M10 45Nm 33ft lbs
23. Other collar nutes on chassis M6 15Nm 11ft lbs
24. M8 30Nm 22ft lbs
25. M10 50Nm 37ft lbs
26. Front Sprocket 44ft lbs

\TF