SOURCE: 1993 yamaha yz 250 bareel damage
there's a company called Langcourt (www.langcourt.com) that specialize in barrel repair. i just had mine done there. i've also got a 1993 yz 250 stripped for parts if you're interested in anything else, unfortunatly i've already sold the barrel.
SOURCE: how to set a power valve on a yz 250 1989 and how
Google " service manuals yamaha "
or go to www.repairmanuals.com
or try your local library. Often guys will donate manuals to the library.
You might find a free pdf service manual on this site, they have a ton of them.
http://www.carlsalter.com/motorcycle-manuals.asp
Please rate this solution. Thanks!
SOURCE: hi i have a 1998 yamaha yz 250 that when you start
Are you loosing transmission gear oil? I seem to remember an older bike I had with a crank seal issue. Gummed up plug is usually only 2 things:
1) Carb too rich. Check jetting or sticky float needle valve that will dump fuel into the intake manifold.
2) Too much oil (check mixture ratio or crank seals that is mixing crankcase oil with the fuel mixture). Either of these two oil issues should produce a massive amount of tailpipe smoking and a noticable drop in power.
SOURCE: what is valve clearance for a 250 yamaha timberwolf
what an *******. If I had a manual or my library had one I wouldnt be asking the question. If I need help fixing something dont tell me to go jump in a lake just dont answer
SOURCE: power valve position and installation for yz 125
The proper adjustment is achieved when the notch in the actuator lines up with the pin hole in the cylinder casting.
293 views
Usually answered in minutes!
×