I was driving my bike for about a week with no problems then last night i tried to put it in first while holding down the clutch lever and it just grinds a gear then dies like the clutch lever was never pressed. i put the bike in neutral and it moves fine. if i put it in first without touching the clutch lever it wont move like usual but if i press the clutch lever the bike moves but harder like clutch is half engaged. i think the clutch wont disengage properly and i have already bled the clutch system with dot4 twice. anybody know whats going on?
Bleed your slave cylinder on the sprocket cover and refill the hydraulic fluid. If you have any leaks you will get air in the system and it will not fully disengage the clutch. As for the 750, they have cable clutches and you just need to adjust the slack of the cable.
1,364 views
Usually answered in minutes!
The cam lever moves freely now ant the clutch won't engage how can I fix this it was fine before just a little stiff but not bad
×