Need to know how to adjust clutch on 03 focus with 5 speed

99 00 01 02 03 FORD F150 MANUAL TRANSMISSION 5 SPEED MAZDA-TOYO KOGYO 4X2 8 CYL

will it shift if you double clutch ?

might be a shift linkage adjustment
internal shift fork has broken a scroll pin

clutch fork movement ok ?

It won't go into any gear? Fluid is good? Is the clutch working? Throw out working? Need more info to be able to answer more.
Post more info. Thanks, Viking.

U need a new clutch, period.

if clutch not slipping, problem is in the shift linkage or cable could be damaged or need adjusting.

If it's a hydraulic operated clutch, as I think it is, then no, there is no adjustment. Only the cable operated clutches were adjustable. But there is a clutch pedal height and free-play adjustment that needs to be correct. Freeplay distance is 3/16 to 5/8 inch, adjusted at the pedal end of clutch pushrod. I don't know the pedal height for your pickup (you'll have to ask some toyota person), but the adjustment is made near top of pedal where it contacts the stopper bolt.

if the engine spins when in gear and clutch released with no movement then the clutch is f.....

The clutch is not fully releasing. You can try putting it into some other gear first, then rapidly moving to first gear, but really, you need to either adjust the clutch, or get it repaired.

need a new clutch end of story

sounds like your clutch needs adjusting . There should be adjustments on the top or bottom of cable. If adjustment is ok check clutch pedal points the brackets that support it sometimes crack if the cable gets stiff

yes the clutch is
well u have to take the gear box out
and the clutch is on the back of the engine


now the cable runs from the pedel to the gear box
if u look u will see a blck cable and you can adjust it
it might need adjusting