2000 Harley Davidson FXD Dyna Super Glide Logo
A
Anonymous Posted on Apr 15, 2012

How to remove primary cover on a 2001 Harley Davidson FXD Dyna Super Glide

5 Related Answers

Anonymous

  • 22 Answers
  • Posted on Nov 10, 2008

SOURCE: change a stator

First secure the bike on a lift. disconnect battery.remove standard footpeg.Remove standard shifter. Remove all allen head bolts from outer primary cover. Some bolts are longer so keep track of where they go.Two bolts on the primary inspection cover also hold the outer to the inner primary case, so remove the cover.Now remove the outer primary case.The clutch,primary chain,adjuster, and compensating sprocket must be reoved as a single unit.Once you have done this take a rag and grasp the rotor and slide it off of the main engine shaft.Unplug the stator and remove the set screws holding it in place.Reverse procedure to install new stator.

Ad

Anonymous

  • 22 Answers
  • Posted on Nov 10, 2008

SOURCE: oil plug

on the bottom of the oil pan

Anonymous

  • 2712 Answers
  • Posted on Nov 20, 2008

SOURCE: change a stator

First secure the bike on a lift. disconnect battery.remove standard footpeg.Remove standard shifter. Remove all allen head bolts from outer primary cover. Some bolts are longer so keep track of where they go.Two bolts on the primary inspection cover also hold the outer to the inner primary case, so remove the cover.Now remove the outer primary case.The clutch,primary chain,adjuster, and compensating sprocket must be reoved as a single unit.Once you have done this take a rag and grasp the rotor and slide it off of the main engine shaft.Unplug the stator and remove the set screws holding it in place.Reverse procedure to install new stator.

Anonymous

  • 119 Answers
  • Posted on Oct 28, 2009

SOURCE: how to change oil in 2003 HD FXD Dyna Super Glide

remove the drain plug from the oil pan, you will need either a 3/4" box wrench or a 5/8" box wrench and the drain plug will be facing forward on the the oil pan. It is easiest to remove this drain plug from under the right side of the bike. put drain plug back in after about 10 m,inutes of drain time and tighten to 18 ft. lbs. Dont forget to change the oil filter as well.

Anonymous

  • 4565 Answers
  • Posted on Apr 14, 2010

SOURCE: Repair manual for 2002 Harley Davidson Dyna Super

There are many service manuals available for your bike. Of course, the factory service manuals are the best and you should be able to order one at any local dealer.

If not, there are other sources for both the original Harley manuals and other manuals. Do a search on the internet for motorcycle service manuals. Two such places are www.motolit.com and www.motorcyclebooks.com A service manual should not be difficult to find.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Adjust primary chain 99 fxd dyna superglide

gain access thru inspection cover oval shaped in primary cover & adjust the shoe upwards to tighten chain
0helpful
1answer

What is the oil capacity for primary cover on a 99 Dyna Super Glide

Fill it with oil until the oil just touches the bottom of the clutch basket. hould be a little less than a quart. Don't use motor oil, unless it is Harley's Syn 3.
1helpful
1answer

Torque specs derby cover 2001 dyna super glide

Tighten inspection cover screws (13, 14) to 84-108 inlbs (9.5-12.2 Nm). in a cross pattern


0helpful
1answer

2007 Dyna Super Glide FXD, Do I pull the starter out without going into the Primary ? seems you do..

You need to pull primary. Then remove starter gear bolt. Disconnect battery. Then remove 2 starter allen bolts. Disconnect battery off starter and start wire. MOPAR KENNY
2helpful
1answer

Change a stator

First secure the bike on a lift. disconnect battery.remove standard footpeg.Remove standard shifter. Remove all allen head bolts from outer primary cover. Some bolts are longer so keep track of where they go.Two bolts on the primary inspection cover also hold the outer to the inner primary case, so remove the cover.Now remove the outer primary case.The clutch,primary chain,adjuster, and compensating sprocket must be reoved as a single unit.Once you have done this take a rag and grasp the rotor and slide it off of the main engine shaft.Unplug the stator and remove the set screws holding it in place.Reverse procedure to install new stator.
Not finding what you are looking for?

763 views

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...